|
|
|
 |
|
|
Smart Charger (1.8A) with 3 pins Plug for 36V NiMH / NiCd Pack
|
|
Product Options
| Connector Option: |
|
|
Features
- Designed for safe charging 36V NiMH battery pack with capacity > 1800mAh
- Built in Ic's to smart control charging status and keep battery charged fully and safely, which features with advanced function as the follows:
- 1.8A pulse current and make charging efficient
- Detect Minus delta V ( > 6 mV/cell) to cut-off power when battery is full.
- Detect temperature rising rate. ( dT/dt) If battery pack temperature rises too fast, (>0.5oC/60S)the charger will reduce charging current.
- Detect battery pack's max. temperature ( T max.). If pack's temperature >70oC, the charger will cut-off power.
- Over charge protection; Polarity reverse protection.
- Part Number: CH-UN3618
- Included 1 pcs connector adaptor, from 3 pin male cannon connector to Alligator clip with 10K thermistor ( 70oC) for connect to battery pack
- Red Alligator clip = Positive
- Black Alligator clip = Negative
- Black wire = 10k thermistor (Temperature sensor)
- You must attach the thermistor ( temperature sensor ) to battery pack before charging
- Red clip shall connected to positive end of battery, and black to negative
- Part Number: CH-UN3618-V1
- One 3 pin male cannon connector is installed with the smart charger.
- Pin 1 = Vbatt
- Pin 2 = Ground
- Pin 3 = Thermistor
- Included 1 pcs connector adaptor, from 3 pins female cannon connector to Alligator clip with 10K thermistor ( 70oC) for connect to battery pack
- Red Alligator clip = Positive
- Black Alligator clip = Negative
- Black wire = 10k thermistor (Temperature sensor)
- You must attach the thermistor ( temperature sensor ) to battery pack before charging
- Red clip shall connected to positive end of battery, and black to negative
- Recognized or tested by one of NRTL (National Recognized Testing Laboratory) , for more information, please contact us
|
Specification
- 100-240V AC input for worldwide use.
- Temperature sensor: NTC R25 =10 K B=3960
- Dimension (LxWxH): 69 (2.7")X 91 (3.6") X 127.22 (4.9")
- Weight: 1.0lb 3.0Oz (544 grams)
- Specification
|
Operation Instruction
- Connect battery pack to output connector and plug AC power source
- Make sure battery polarity is connected correctly (Red wire is positive)
- Attach temperature sensor to battery pack firmly
- After it connect the correct battery pack, the red LED will be on, shows that it is charging.
- After battery is fully charged, green LED will be on and it shows the battery fully charged.
|
Warnings
- Please don't use the charger for low capacity battery pack (<2000mah).. strongly suggestion to use Powerizer brand high drain rate battery pack. We are not responsible for any damage caused by charging other brand battery using this charger.
- Please plug in AC power first, then connect the battery to the charger, otherwise, there is no output from the charger.
- Please don't charge battery pack which is not 36V or 36V with capacity < 1800mAh.
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
|
|
|
Your Price: From $25.95 to $35.00
|
Your Price: From $19.50 to $24.95
|
Your Price: From $28.95 to $38.95
|
Your Price: From $15.50 to $20.00
|
|
|
|
Your Price: From $20.95 to $24.95
|
|
Your Price: From $28.95 to $92.95
|
|
Your Price: From $19.95 to $21.95
|
Your Price: From $19.95 to $27.95
|
Your Price: From $44.95 to $64.45
|
Your Price: From $89.95 to $113.95
|
|
| | |
Product Reviews
|
|
|