About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Multi-Current Universal Smart Charger for 2.4V - 7.2V NiMH/ NiCd Battery Pack - CE listed

Option 2: CU-J1072 Male HitecCU-J1121 mini USB CH-UN130-V1:Mini Female Tamiya  CH-UN130-V4:Female Conductor trail connector CH-UN130-V5
Your Price: From $25.95 to $35.00

Product Options

Connector option:


Manufacture Part# USC2.4-7.2-0612
  • Designed for any NiMH/NiCd battery pack from 2.4V- 7.2V with capacity > 600mAh
  • 100-240V AC input for world wide power support.
  • Ideal for 4.8V - 7.2V NiMH battery packs of RC flight, RC car, Bike lighting and rechargeable flashlight.
  • It can also be use as a battery charger module for any DC device
  • It is a very smart charger. Just plug it in and wait for battery to charge
    • Automatically detect battery pack's voltage, Red LED will be on during charging.
    • Automatically cut-off by negative delta V when battery pack is fully charge.
  • When battery is fully charge, LED will change from Red to "Blinking Green" color.
  • Two current levels 0.6A and 1.2A, are selectable by a switch 
    • For battery pack less than or equal to 1200mAh, please switch charging rate to  0.6A
    • For battery pack over 1200 mah, please switch charging rate to  1.2 A
  • The fuse is installed inside to protect over current, short circuit & reverse polarity protection.
Charging Time
  • about 4 hrs for 4500 mAh battery pack,
  • about 1.5 hrs for 1800 mAh battery pack
  • about 1hr for 1200 mAh battery pack
Dimension(LxWxH) 1.5" X 2.5" X 5.5"
Weight 14 oz (397 g)
Certificate CE listed

Connector Option:

Please download the Specification here


  • The charger is designed for fast charging NiCD and NiMH battery packs from 2.4V to 7.2V battery. with capacity > 600 mAh.
    • Please don't use the charger for low capacity battery pack (600mah). 
    • Please don't charge battery pack with voltage < 2.4V or voltage > 7.2V
  • Please make sure polarities between charger and battery pack are match before charging the battery.  Otherwise wrong polarity may burn the fuse and damage the charger.
  • The charger is designed for indoor use only.
  • The charger should be horizontally position and work in well ventilated condition. Avoid it being wet and keep it away from flammable/ explosive goods.
  • Cut off the power supply before connecting or disconnecting the charger with batteries.
  • Strongly suggest to use Powerizer brand high drain rate battery pack. We are not responsible for any damage cause by charging other brand battery using this charger.
  • California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

Related Products

  • You can combine this charger with various size battery holders to charge all size of single cells (2-6 cell)  ( must choose small charging current if use holder)
  • If you would like to use this charger to plug with various connector instead of Tamiya,  please choose one of your connector in our connector section

Related Products

Product Reviews

(5 Ratings, 4 Reviews) Average Rating:
Great charger for a great price. This is my second one and my other one is still
Darin (CA 95758) 8/4/2015 1:54 PM
Great charger for a great price. This is my second one and my other one is still going strong.
Still going
Ryan Campbell (CA) 9/8/2012 11:00 PM
I've been using two of these for 6 years now. They're been dependable and versatile. I've noticed that the 1.2A setting can be a little fussy with older batteries, so I'll switch to the .6A setting with those to prevent undercharge. Other than that, not much to complain about.
Products are excellent
plummew (Concord, MA) 6/27/2012 3:46 PM
Products are excellent, but instructions should be more clear. My older charger must have its input voltage interrupted when I connect the batteries. My newer charger does not say that, but merely says to turn off the voltage when connecting the batteries. Can I ignore that if I am careful, or does the input voltage have to be interrupted also? Too much guesswork for me! I don't want to have to interrupt the input voltage if I don't really have to!
I will have them along at the meeting to ninight
Jonold (Little Chute, WI) 6/27/2012 3:30 PM
As chairperson for the EAA event I handle the QSL cards and mailing of the event certificates. The 2011 certificates are completed and I will have them along at the meeting to ninight
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists