Universal Smart Charger (1.5A) for 19.2-24V NiMH/ NiCd Battery Packs with Tamiya Connector

Features:

• Universal Fast and Smart Charger  is designed for charging any  19.2V - 24V NiMH and NiCd Battery Packs with capacity > 1500mAh (16-20 Cells pack)
• 100-240V AC input for worldwide use.
• The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
• Battery will be charged at 1.5A constant current
  • For 3 Ah battery pack,  charging time is about 2.5 hrs.
  • For 13Ah battery pack, charging time is about 10 hrs.
• Protection fuse for over current, short circuit & reverse polarity protection.
• Charging time can be estimated as the follow:

             Charging time ( Hrs ) = 1.2x Battery capacity ( Ah) / 1.5

• One standard Tamiya female connector installed with the charger. You will need to order the connector adaptor for our battery pack that has a mini male charging terminal.
• One set connector adaptor from Standard male tamiya to Clips is  included for charging any battery packs.  
• Included one pc  temperature sensor (BEC female plug) for DIY a 19.2V-26.4V battery pack's temperature sensor terminal , which must be plugged to a charger's temperature sensor plug (BEC male connector)
• It is a very smart charger.  Just plug it in and wait for the battery to get charge.
• The charger is designed for fast charging any 19.2V - 24V Nicd and NiMH battery packs. Ideal for 19.2V - 24V battery pack for E-bike, E- scooter and hunting light
• Dimension: 2.0"H X 2.7"W X 5.8"L.
• Weight: 15 OZ. (426 grams) 
•  Please click here to download specification

Temperature Sensor Usage (BEC male connector):

The temperature sensor (BEC male connector) included with the charger must be attached firmly to battery pack as gallary picture shown above

Precautions:

• Please don't use the 19.2V-24V charger for charging battery pack with voltage <19.2V or voltage >24V and capacity <1500 mAh
• The charger is designed for indoor use only.
• Battery pack must be made by high drain current cell.
• Please contact your seller for any damage and consequent damage by misuse
• The charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods.
• Don't cover the charger when charging. ambient temperature shall not be more than 40 degree C.
• Cut off the power supply before connect or disconnect the charger with batteries. Also make sure battery polarity is connected correctly
• Don't try to disassemble the charger high voltage inside, danger!
   

Smart Tip:

• If you would like to use this charger in your car,  you can choose our 110W DC-AC inverter, then you can charge your RC battery everywhere.