Custom Protection Circuit Module (PCM) for 6S Li-Ion Battery Pack at 30A limited (#583)

Your Price: RFQ

Communication:

Quantity:

Protection Circuit Board Specifications For 6S Li-ion/Li-po Battery Pack
Model: CU-JAS372
No.	Test item		Criterion
1	Voltage	Charging voltage	DC: 25.2V CC/CV (4.2V/1cell)
		Balance voltage for single cell	4.20V±0.05
2	Current	Balance current for single cell	67mA±5mA
		Current consumption for single cell	≤20μA
		Maximal continuous Charging current	30A
		Maximal continuous discharging current	30A
3	Over charge Protection (single cell)	Over charge detection voltage	4.250±0.025V
		Over charge detection delay time	0.5S-2S
		Over charge release voltage	4.150±0.05V
4	Over discharge protection (single cell)	Over discharge detection voltage	2.50±0.08V
		Over discharge detection delay time	1500-2500mS
		Over discharge release voltage	3.0±0.10V
5	Over current protection	Over current detection voltage	0.1V±0.015V
		Over current detection current	120±10A
		Detection delay time	1200-2000ms
		Release condition	Cut load
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	200-800us
		Release condition	Cut load
7	Resistance	Protection circuitry（B- TO P-）	≤40mΩ
8	Temperature	Operating Temperature Range	-40～+85℃
		Storage Temperature Range	-40～+125℃
		Over Temperature protection (discharge)	65±℃
9	Weight		1Oz
10	Dimenstion	L x W x T	CU-JAS372: 126 x 66 x 5 mm CU-JAS372-C: -126 x 66 x 7.5 mm and -56x15x6 mm
11	Specification in pdf file	CU-JAS372: Download the specification CU-JAS372-C: Download the specification

For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch.
You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.

BMS with SMBus Communication for 6S-15S Li-ion/LiFePO4 Battery Pack at 50A rate (#1428) Your Price: RFQ	Connector/Adaptor: For connecting PCM with Fuel Gauge to Fuel Gauge Display Board (10.5" long) (#4014) Your Price: $4.25	Protection Circuit Module (PCM) with Equilibrium Function & Fuel Gauge for 22.2V Battery Pack at 10A limit (#4364) Your Price: $29.95
Protection Circuit Module (PCM) with Equilibrium Function for 22.2V Battery Pack at 20A limit (#4365) Your Price: $41.50	Fuel Gauge for PCB of 22.2V Li-Ion Battery Pack (#4481) Your Price: $9.95	Protection Circuit Module (PCB) for 6 cells (22.2V) Li-Ion Battery Pack at 15A limited (#5734) Your Price: $19.95
Protection Circuit Module (PCM) with Equilibrium Function for 22.2V Battery Pack at 30A limit (#6074) Your Price: $69.95	Protection Circuit Module (PCB) for 6 cells (22.2V) Li-Ion Battery Pack at 7A limited (#6279) Your Price: $18.95	Custom Protection Circuit Module (PCB) for 6 cells (22.2V) Li-Ion Battery Pack at 7A limited (#8417) Your Price: $21.95

(0 Ratings, 0 Reviews)