Protection Circuit Module (PCB) for 6 cells (22.2V) Li-Ion Battery Pack at 15A limited (#5734)

Protection Circuit Module Specifications  For 22.2V Li-ion/Li-po Battery  Pack
Model: PCB-LI22.2V15A
1	Voltage	Charging voltage	DC: 25.2V CC/CV（4.2V/cell）
		Balance voltage for single cell	N/A
2	Current	Balance current for single cell	N/A
		Current consumption for single cell	≤20μA
		Maximal continuous Charging current	15A
		Maximal continuous discharging current	15A
3	Over charge Protection (single cell)	Over charge detection voltage	4.25±0.05V
		Over charge detection delay time	0.5S-2.0S
		Over charge release voltage	4.05±0.05V
4	Over discharge protection (single cell)	Over discharge detection voltage	2.50±0.07V
		Over discharge detection delay time	10-300mS
		Over discharge release voltage	3.0±0.1V
5	Over current protection	Over current detection voltage	0.2±0.015V
		Over current detection current	30±5A
		Detection delay time	5ms-60ms
		Release condition	Cut load
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	200-800us
		Release condition	Cut load, auto recover
7	Resistance	Protection  circuitry (MOSFET)	≤30mΩ
8	Temperature	Operating Temperature Range	-40～+85℃
		Storage Temperature Range	-40～+125℃
9	Weight		0.6Oz (17.0 grams)
10	Dimenstion	LxWxT	48x44x3.5 mm (1.9 x 1.73 x 0.14")
11	Specification in pdf file	Download the specification.

 For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

• If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch. 
• You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.