Fuel Gauge for PCB of 29.6v Li-Ion Battery Pack (#4625)

Note: This fuel gauge is not intend to be use as a very accurate reading of the battery pack's capacity. The battery level indication can vary by 5% depending on the capacity of the pack!

Features

• Apply for PCB of 8 cell Li-ion /Li-polymer battery pack.
• No external power is need
• Can connect directly to pcb/pcm via special connector on board or connect directly to output of battery pack
• 5 LED display for battery energy level from  20% to 100%
  • 0% LED Flashing pack voltage:  < 24.5V ( must recharge battery )
  • 1 LED = 20% pack voltage: 26.8-24.5V ( battery need recharging )
  • 2 LED = 40% pack voltage: 28.8-26.8V
  • 3 LED = 60% pack voltage: 30.8-28.3V
  • 4 LED = 80% pack voltage: 32.6-30.8V
  • 5 LED = 100% pack voltage:33.6-32.6V 

Specifications

• In  voltage: 5 ~~ 32V
• Supply current: Max 2mA
• Dimension: L51x W26 x T4mm
• Connector: 5.5" long 2 pin Female SH connector
•  Please click here to download the specification of 2 pin Female SH connector with housing diagram 

Warnings:

• Please do not plug in wrong polarity,  otherwise the module will be completely  destroyed.
• The resistance potential ratio of energy display module in different packs are different, only use the voltage that the label nominated.
• Please make sure your selection is correct before you buy.