PCM with Equilibrium &Temperature protection function for 22.2V-44.4V Li-Ion / 19.2V-38.4V LFP Battery Pack @ 30A limit (#6236)

This protection circuit is specially designed for 22.2V-44.4V Li-Ion Battery packs or 19.2V-38.4V LiFePO4 Battery Packs with 30A discharging rate. Different than normal PCB, it provides equilibrium function after battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps cells have longer service life.

For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

• If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch. 
• To achieve balance, each cell in battery pack must has equal voltage within tolerance. When charger LED turn Green, allow 30 minutes for pack to balance before use.
• You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.