 |
 |
|
 |
|
|
Custom LiFePO4 26650 Battery: 25.6V 13.2Ah (337 Wh, 30A rate, 26650-3300) in two blocks
|
|
In Stock
Product ID # 10769
Part Number: PR-CU-R516
Lead Time: TBC
|
Features
| *Important Shipping Regulation |
This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more... |
| Packing |
LFP Battery: 25.6V 13.2Ah (337 Wh, 30A rate) 8S4P build with 26650 3300mAh cell with PCM configure in two blocks with 500mm sensing wires linked |
| Voltage |
25.6 V (working) 28.8 V (peak) 20.0 V ( cut-off) |
| Capacity |
13.2 Ah (337.92 Wh) |
| Cycle life |
> 1000 cycles (80% of initial capacity @ 0.2C rate, IEC Standard) |
| Protection |
- One PCM(30A limited) installed with the battery pack and protects the battery from
- Overcharge (>31.2V)
- Over discharge (<16.0 V)
- Over drain ( >30 Amp)
- Short circuits
- Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
|
| Pre-wired |
- Charging Terminals: 36.0" 18AWG wires
- Discharging Terminals: 12.0" 14AWG wires (locate at specify position)
|
| Charging rate |
15A Max |
| Max. Discharging Rate |
30A limited by PCM |
| Dimensions(LxWxH) |
130mm (5.12") x 105mm (4.13") x 70 mm (2.76") and 105mm (4.13") x 105mm (4.13") x 70 mm (2.76") |
| Weight |
3176 grams (7.0 Lb) |
Warnings
- 25.6V LiFePO4 battery pack shall be cut-off at 28.8V during charging and 20.0V during discharging
- Must charge the pack via only charging terminal.
- Please click Knowledge on LiFePO4 battery to learn more details
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
|
Product Reviews
|
|
|