|
|
|
 |
|
|
Li-ion 18500 Rechargeable Cell: 3.7V 1600mAh (5.92Wh) - UN38.3 Passed
  With Tabs LC-18500-V2:Yes,with TM-MB1/TM-MB2 |
|
Your Price: From $5.35 to $7.35
Product Options
| Add Tabs: |
|
* Whole number only
|
Features
| Features |
- 3.7V 18500 size Cylindrical Li-Ion Cell
- Lighter weight and higher energy density than any other rechargeable cell
- 18500 cell is a little shorter than the 18650 cell, and it is perfect for building compact sized packs and high capacity packs for RC aircraft, RC cars batteries
|
| Voltage |
Nominal 3.7V;
Max Charge Voltage: 4.2V±0.05V;
Minimum Discharge Voltage: 3.0V±0.05V |
| Capacity |
Typical 1600 mAh @0.2C Discharge
Minimum 1580mAh @0.2C Discharge |
| Charge Current |
Standard: 320mA/0.2C;
Max.: 1600mA/1C |
| Discharge Current |
Standard: 320mA/0.2C;
Fast: 3200mA/2C;
Pulse: 4800mA/3C |
| Terminal options |
- LC-18500: Without Tabs
- LC-18500TB: With TB-AAS tabs
- LC-18500-V2: With TB-MB1/TB-MB2 tabs
|
| Initial Impedance |
Max. 100mΩ |
| Dimensions (Dia x H) |
18.5 x 50.3mm |
| Weight |
36±2 g (1.35 oz) |
| Temperature |
Charge: 0°C to 45°C;
Discharge: -20°C to 60°C
Storage: -5°C to 35°C |
| Cycle Performance |
80% of initial capacity at 300 cycles |
Please download the Specification here
Warnings
- Li-Ion Batteries may explode if charged or discharged improperly.
- Please possess knowledge of electronic and understand how to handle Li-ion battery.
- We reserve the right not to sell and void the warranty it you don't meet the above statement.
- Please use a protection IC (PCB) to keep battery from overcharge and over discharge
- Never solder directly onto the Li-ion battery as overheat might cause battery to explode. If you are making a pack or need to solder batteries together, you need to get battery with tabs on it. You need to solder on tabs instead directly onto the battery.
- Please read more safety warning about Li-ion battery
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
Related Products
- Please choose our smart chargers to charge single 18500 cells
- Need to DIY? Please install our PCB or your own PCB withthe following features:
- 4.2V/cell over-charge protection
- 3.0V/cell over-discharge protection
- Max current, over-drain protection
- Shortcircuit protection.
- Batteryspace.com is NOT liable for any mis-use due to any other brand of PCB applied
- If you don't know how to make Li-Ion pack, please don't DIY, click here to choose a pre-wired Li-Ion pack module from 3.7V-37V
|
|
|
|
Your Price: From $21.79 to $27.54
|
|
|
|
|
|
|
|
Your Price: From $42.50 to $47.80
|
|
|
|
|
|
|
|
|
|
|
|
| |
Product Reviews
| (4 Ratings, 2 Reviews) |
Average Rating:
|
Product was as specified and not easy to find elsewhere.
John
(Rochester, NY 14625)
8/4/2015 1:53 PM
Product was as specified and not easy to find elsewhere.
|
Good Price
Michael E. Stora, Ph.D.
(Maricopa, AZ)
5/13/2015 11:40 AM
I've used a few of these for "3xAAA in a barrel" flashlight conversions where an 1865 just will not fit. Only unusual thing to note is that the semi-button is not ferromagnetic on this particular cell (stainless?)
|
|
|
|