|
|
|
|
|
|
Home
Battery Analyzer / Cycler: 8 Channels (0.05A-10A, up to 50V/channel) with Laptop & Software
|
Email for Shipping Cost
Product ID # 12358 Part Number: BA8-50V10A
Lead Time: To be advised
|
Specification:
Input AC |
AC 380V/208V ± 10% / 50Hz |
Input Power |
5266W |
Resolution |
AD: 16bit; DA: 16bit |
Input impendence |
≥1MΩ
|
Voltage |
CV output range |
0.25V - 50V |
Min discharge voltage |
3V |
Accuracy |
± 0.1% of FS |
Stability |
± 0.1% of FS |
Current |
Output range/channel |
0.05A - 10A |
Accuracy |
± 0.1% of FS |
CV cut-off current |
0.02A |
Stability |
± 0.1% of FS |
Power |
Output power/channel |
500W |
Stability |
± 0.2% of FS |
Time |
Current rsponse time |
Max rising time:20ms |
Working step time |
≤(365x24)h/step Time format-00 : 00 : 00 : 000 (h, m, s, ms) |
Data record |
Data record conditions |
Min data record interval : 100ms Min voltage change: 100mV Min current change: 20mA
|
Frequency |
10Hz |
Charge |
Charge modes |
CC, CV, CCCV, CP, CCCV for battery pack |
Cut-off condition |
Voltage, Current, Time, Capacity, -△V |
Discharge |
Discharge modes |
CC, CP, CR, |
Cut-off condition |
Voltage, Current, Time, Capacity, -△V |
Pulse |
Charge |
CC, CP, |
Discharge |
CC, CP, |
Min pulse width |
500ms |
Pulse counts |
Up to 32 |
Chg and Dischg switch |
Supported |
Cut-off condition |
Voltage, Time |
DCIR |
Supported |
CH parallel |
If output current > 100A, then supported, in parallel mode pulse function is disabled |
Cycle |
Max cycles |
65535 |
Max steps |
254 |
Cycle nest |
3 |
Protection |
Safety protection |
Power-off data protection |
Off-line operation mode |
User-defined protection conditions, such as upper and lower limited current/voltage, delay time, temperature, etc. |
Hardware protection: IP20 |
Channels feature |
Independent pairs of closed loop for constant |
Channels control mode |
Independent control |
Data acquisition method |
Kelvin connection |
Noise |
<85dB |
Database |
MySQL |
Communication |
TCP/IP |
Operating system |
Windows 7/8/10 64 bit |
Data export |
EXCEL, TXT, CSV, PDF, Plot/Graph |
Disk drive |
Suggest to use laptop with minimum 500GB |
Communication port |
Ethernet port |
Leak Current |
0.05mA |
Communication port |
Ethernet port |
Operation and storage environment requirement |
Operation environment temperature |
0°C- 40°C (When the temperature is 25±10°C, the accuracy error caused by temperature change is less than 50ppm /°C) |
Storage environment temperature |
-10°C~50°C |
Operation environment humidity |
≤70% RH(no moisture condensation) |
Storage environment humidity |
≤80% RH(no moisture condensation) |
Dimensions (WxDxH) (mm) |
600x600x1260 |
Program & Software |
- The software with calibration function is included to set various working modes for measuring capacity and life cycle for all types of rechargeable batteries
- With real-time monitoring windows and integrated graph/data windows, the testing process can be observed more directly and efficiently
- During the test, the software will provide instructions and warnings for assistance
- The calibration software can be used to calibrate the analyzer
|
Test Reports and Curves for analysis |
- Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times-charge/discharge capacity curve, loops times-charge/ discharge efficiency curve, etc)
- Data reports are created by software. User can easily compare the performance of the batteries tested in channels both visually and statistically
|
Protection |
- If power failure occurs during testing, the system will shutdown all operating channels.
|
Accessories |
- one alligator clips with cable for universal connecting
|
Warranty |
One Year limited warranty with lifetime support. (Notes: We do not offer warranty for the laptops. Please contact laptop manufacturer for related issues.) |
Computer:
Laptop Computer |
- Brand new laptop with MS Window 10, MS Excel 2013 30 days free trial is included and latest version testing software are installed and calibrated for immediate use
- Notice: It is suggested to use an external hard drive to keep an instant backup of the collected data.
- New buyers must buy one software-installed laptop to avoid trouble from installation. If you like to run multiple battery analyzers on one Laptop, you can just buy multiple analyzers with one laptop.
- Customer can easily combine up to 20 battery analyzers by using normal Ethernet cable connector via one computer.
- Warning: Please choose 'NEVER' for Screen and Sleep off in Power& Sleep setting of your computer, or it may lose connection from battery analyzer.
|
Standard package:
Item |
Description |
Qty |
1 |
Battery analyzer |
1 |
2 |
Brand new laptop with MS Window 10 system and battery analyzer operation software installed+ Analyzer Software |
1 |
3 |
Alligator Clips for connecting battery |
1 |
|
Your Price: From $17.00 to $25.00
|
Your Price: From $129.00 to $199.00
|
|
|
| |
Product Reviews
|
|
|