|
|
|
|
|
|
Home
Battery Analyzer / Cycler: 8 Channels (5V20A/channel)
|
Out of stock
Product ID # 1331 Part Number: BA8-5V20A
|
BA8-5V20A is an eight-channel battery analyzer to analyze cylindrical and pouch batteries, output range from 0.1A to 20 A , up to 5V. Each channel of the analyzer has independent constant-current and constant-voltage source, which can be programmed and controlled by computer software. This system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc. Specification:
Control Unit:
Control Unit |
- AC 220V (for 110V input, you will need an 4000W inverter, which is not included)
- This picture below shows 1 control unit and 1 analyzer
|
Analyzer:
Input AC |
AC 220V± 10%, 50Hz |
Input Power |
1418W |
Resolution |
AD: 16bit; DA: 16bit |
Input impendence |
≥1MΩ
|
Voltage |
CV output range |
25mV - 5V |
Min discharge voltage |
2.5V |
Accuracy |
± 0.1% of FS |
Stability |
± 0.1% of FS |
Current |
Output range/channel |
0.1A - 20A
|
Accuracy |
± 0.1% of FS |
CV cut-off current |
0.04A |
Stability |
± 0.1% of FS |
Power |
Output power/channel |
100W |
Stability |
± 0.2% of FS |
Time |
Current response time |
Max rising time:20ms |
Working step time |
≤(365x24)h/step Time format-00 : 00 : 00.000 (h, m, s, ms) |
Data record |
Data record conditions |
Min data record interval : 100ms Min voltage change: 10mV Min current change: 40mA
|
Frequency |
10Hz |
Charge |
Charge modes |
CC, CV, CCCV, CP |
Cut-off condition |
Voltage, Current, Time, Capacity, -△V |
Discharge |
Discharge modes |
CC, CP, CR |
Cut-off condition |
Voltage, Current, Time, Capacity |
Pulse |
Charge |
CC, CP, |
Discharge |
CC, CP, |
Min pulse width |
500ms |
Pulse counts |
Up to 32 |
Charge and Discharge switch |
Supported |
Cut-off condition |
Voltage, Time |
DCIR |
Supported |
Cycle |
Max cycles |
65535 |
Max steps |
254 |
Cycle nest |
3 |
Protection |
Safety protection |
Power-off data protection |
Off-line operation mode |
User-defined protection conditions, such as upper and lower limit of current/voltage, maximum capacity, delay time |
Reverse Polarity protection |
Hardware Protection |
Level IP20 |
Channels feature |
Independent pairs of closed loop for constant |
Channels control mode |
Independent control |
Data acquisition method |
Kelvin connection |
Noise |
<85dB |
Database |
MySQL |
Communication |
TCP/IP |
Operating system |
Windows 7/8/10 64 bit |
Data export |
EXCEL 2003, 2010, TXT, CSV, PDF, Plot/Graph |
Disk drive |
Suggest to use laptop with minimum 500GB |
Communication port |
Ethernet port |
Leak Current |
0.005mA |
Channels per unit |
- Eight independent programmable channels
- Each channel can set different working modes and functions independently
|
Operation and storage environment requirement |
Operation environment temperature |
0°C- 40°C (When the temperature is 25±10°C, the accuracy error caused by temperature change is less than 0.005% of FS /°C) |
Storage environment temperature |
-10°C~50°C |
Operation environment humidity |
≤70% RH(no moisture condensation) |
Storage environment humidity |
≤80% RH(no moisture condensation) |
Dimensions (WxDxH) (mm) |
480 x 730 x 130 |
Program & Software |
- The software with calibration function is included to set various working modes for measuring capacity and life cycle for all types of rechargeable batteries
- With real-time monitoring windows and integrated graph/data windows, the testing process can be observed more directly and efficiently
- During the test, the software will provide instructions and warnings for assistance
- The calibration software can be used to calibrate the analyzer
|
Test Reports and Curves for analysis |
- Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times-charge/discharge capacity curve, loops times-charge/ discharge efficiency curve, etc)
- Data reports are created by software. User can easily compare the performance of the batteries tested in channels both visually and statistically
|
Protection |
- If power failure occurs during testing, the system will shutdown all operating channels.
|
Battery Holders |
Two types of battery holders are included in the standard package:
- 8 alligator clips with cable for universal connecting
- 8 spring load holders with adjustable length for measuring cylinder battery upto 70mm(H)
|
Compliance |
CE Certified |
Warranty |
One Year limited warranty with lifetime support. (Notes: We do not offer warranty for the laptops. Please contact laptop manufacturer for related issues.) |
Net Weight |
11.5 kg (26 lbs) |
Shipping Weight |
18 kg (40 lbs) Need to ship as small pallet: LxW: 36"x30". Please email for shipping cost. |
Shipping Dimensions |
|
Video |
|
Computer:
Laptop Computer |
- Brand new laptop with MS Window 10, MS Excel 2013 30 days free trial is included and latest version testing software are installed and calibrated for immediate use
- Computer Minimum requirement: Dual Core system, Processor Speed: ≥2G, ≥ RAM: 5G, Hard drive: ≥200G, NTFS, 64bit,Ethernet ports.
- Notice: It is suggested to use an external hard drive to keep an instant backup of the collected data.
- New buyers must buy one software-installed laptop to avoid trouble from installation. If you like to run multiple battery analyzers on one Laptop, you can just buy multiple analyzers with one laptop.
- Customer can easily combine up to 10 battery analyzers by using normal Ethernet cable connector via one computer.
- Warning: Please choose 'NEVER' for Screen and Sleep off in Power& Sleep setting of your computer, or it may lose connection from battery analyzer.
|
Standard package:
Item |
Description |
Qty |
1 |
Battery analyzer |
1 |
2 |
Brand new laptop with MS Window 10 system and battery analyzer operation software installed+ Analyzer Software |
1 |
3 |
Control Unit and cable lines fo connecting the computer |
1 |
4 |
Alligator Clips for connecting battery |
8 |
Optional:
Item |
Description |
Computer |
If you already have at least 1 unit BA8-5V6000MA |
Control Unit |
If you already have at least 1 unit BA8-5V6000MA |
Movable Rack |
You may order movable rack to organize the battery analyzers with extra cost |
Customization:Custom cable or Coin Cell Testing Board are available with extra cost
|
Product Reviews
|
|
|