Thermal Abuse Test Chamber: 131 L, with Optional Automatic Extinguisher

BS-114 is designed for battery thermal abuse test for IEC62133.  A precision temperature controller will provide  ±1°C accuracy up to Max. 200°C  The Automatic Extinguisher Fixture is optional, which can start spraying when battery catch fire.

SPECIFICATIONS

Working Voltage	220VAC±10%, 50/60Hz, single phase
Max. Power Consumption	1600KW;  2200W Max
Chamber	Interior Material:         Stainless Steel  SS304 Chamber Dimension:   W450 x D540x H540mm / 17.7x21.25x21.25 " Volume:                      131 L 2 removable steel rack shelves Window:                     high-temperature glass with anti-explode film, size:  W200mm x H300mm Feedthrough Holes:    2x 50 mm Dia. holes on the right side for electronic wires and  Extinguisher pipe Anti-explosion Port:              1x 150 mm Dia. port on the back, which will open when the chamber is built up pressure  1x 32 mm Dia. venting hole is on the back, which will keep hot air continuous flow for venting
Working Temperature	RT  200°C for continuous operation Maximum Heating Rate:  7 ºC/min
Temperature Controller	Single point setting temperature controller with ± 1°C accuracy. Build-in over-temperature, thermocouple failure protection alarm. Temperature uniformity inside chamber:  ± 2°C Optional Eurotherm temperature is optional with ± 0.1 °C accuracy at the extra cost
Extinguisher Fixture (Optional at extra cost)	The fixture can install 2 - 6-liter Extinguisher as recommended below When chamber temperature reaches> 250°C,  Motor will open the valve of extinguisher to spray  One remote control is included, which open extinguisher at remote distance manually Click Picture below to order a special lithium battery extinguisher  from the manufacturer directly
Product Dimensions(LxWxH)	Overall Chamber Unit: W660mm x D765mm x H890mm Extinguisher Fixture: W220mm x D320mm x H650mm
Weight	NET Weight:90Kg; 198LB Shipping Weight: 110Kg, 242LB
Recommended Battery Capacity for testing	10Ah ( 3.7V) or  37wh  without an automatic extinguisher 30Ah ( 3.7V) or  110 wh with an automatic extinguisher
Calibration	You may order NIST certified temerature monitor to calibrate the temperature of inside chamber at extra cost Please order here
Compliance	If you need UL / CSA / TUV certificate, there is extra cost
Warranty	One year limited warranty with lifetime technical support