Protection circius Module ( PCB ) for 11.1v Li-Ion / 9.6V LFP Battery Pack (2.0A Limit) -- 50 Pc Min Order (#6214)

Protection Circuit Module Specifications  for 11.1V  Li-ion / 9.6V LFP  Pack with 2.0 A current Limit 

All Li-Ion Battery packs must connect to a protection circuit module to protect Li-Ion Battery from overcharge, over discharge  and to prevent accidental battery explosion due to its extra high energy density. The protection circuit is specially designed for 11.1V  Li-ion / 9.6V LFP  Pack. It also can be use for Polymer Li-Ion battery sold by Batteryspace.
Please refer to the specification on how to wire the pcb to battery. 
Please be advised that this circuit will provide the following protections:

Please select the Battery type, Battery pack voltage via "Battery Pack Voltage?" Option menu.

• Over charge protection voltage for single cell: 3.80V ~ 4.4V +/- 0.05V
• Over discharge protection voltage for single cell: 1.90~3.3V +/- 0.1 V
• Maintains Li-Ion Battery pack's discharge current lower than 2.0A.
• Protect battery from short circuit and wrong polarity
• Common Charge/Discharge terminal
• Over-current detection protection: 3A~10A
• Dimension: 22mm(0.9") x 12mm(0.5") x 3mm(0.1")
• Need other customized voltage of PCB/PCM with different size? Please click below to order
• Customized 2 Cells PCB for 7.4V Li-Ion / 6.4V LiFePO4
• Customized 3 Cells PCB for 11.1V Li-Ion / 9.6V LiFePO4
• Customized 4 Cells PCB/PCM for 14.8V Li-Ion / 12.8V LiFePO4
• Customized 5-8 Cells PCB/PCM for 18.5V-29.6V Li-Ion / 16V-25.6V LiFePO4
• Customized 8-16 Cells PCB/PCM for 29.6V-59.2V Li-Ion / 25.6V-51.2V LiFePO4
• Customized 16-26 Cells PCB/PCM for 59.2V-96.2V Li-Ion / 51.2V-83.2V LiFePO4