Protection Circuit Module (PCM) with Equilibrium function for 12S Li-Ion Battery Pack at 80A rate (#3806)

Protection Circuit Board Specifications  For 43.2V/44.4V Li-ion/Li-po Battery  Pack
Model: PCM-LI12S80A
No.	Test   item		Criterion
1	Voltage	Charging voltage	DC: 50.4V CC/CV (4.2V/1cell)
		Balance voltage for single cell	4.20±0.03V
2	Current	Balance current for single cell	84±5mA
		Current consumption for single cell	≤20μA
		Maximal continuous Charging current	80A
		Maximal continuous discharging current	80A
3	Over charge Protection (single cell)	Over charge detection voltage	4.250±0.025V
		Over charge detection delay time	0.5S-2.0S
		Over charge release voltage	4.050±0.05V
4	Over discharge protection (single cell)	Over discharge detection voltage	2.50±0.07V
		Over discharge detection delay time	10-30mS
		Over discharge release voltage	3.00±0.1V
5	Over current protection	Over current detection voltage	0.20V±0.015V
		Over current detection current	250±20A
		Detection delay time	5ms-20ms
		Release condition	Cut load
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	200-800us
		Release condition	Cut load
7	Resistance	Protection  circuitry (B- TO P-)	≤30mΩ
8	Temperature	Operating Temperature Range	-40 to +85℃
		Storage Temperature Range	-40 to +125℃
		Over Temperature Protection (for discharge)	65±℃
9	Weight
10	Dimenstion	L x W x T	155 x 70 x 25 mm
11	Specification in pdf file	Download the specification

 For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

• If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch. 
• You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.