About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Protection Circuit Module (PCB) for 6 cells (19.2V) LiFePO4 Battery Pack at 15A limited (#5453)

Your Price: $19.95
In Stock

Product ID # 5453
Part Number:

 Protection Circuit Module Specifications  For 19.2V LiFePO4 Battery  Pack 
Model: PCB-LFP19V15A
1 Voltage Charging voltage DC: 21.6V CC/CV(3.6V/cell)
Balance voltage for single cell N/A
2 Current Balance current for single cell N/A
Current consumption for single cell ≤20μA
Maximal continuous Charging current 15A
Maximal continuous discharging current 15A
3 Over charge Protection
(single cell)
Over charge detection voltage 3.9±0.05V
Over charge detection delay time 0.5S-2.0S
Over charge release voltage 3.80±0.05V
4 Over discharge protection
(single cell)
Over discharge detection voltage 2.00±0.05V
Over discharge detection delay time 100-250mS
Over discharge release voltage 2.30±0.1V
5 Over current protection Over current detection voltage 0.2V±0.015V
Over current detection current 30±5A
Detection delay time   5ms-30ms
Release condition Cut load
6 Short protection Detection condition Exterior short circuit
Detection delay time 200-800us
Release condition Cut load, auto recover
7 Resistance Protection  circuitry (MOSFET) ≤30mΩ
8 Temperature Operating Temperature Range -40~+85℃
Storage Temperature Range -40~+125℃
9 Weight   0.6Oz (17.0 grams)
10 Dimenstion LxWxT 48x44x3.5 mm (1.9 x 1.73 x 0.14")
11 Specification in pdf file Download the specification.  

 For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category


  • If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch. 
  • You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.

Related Products

Product Reviews

(1 Rating, 1 Review) Average Rating:
Protection Circuit Module performs well, as advertized.
Peter J Walsh (Colorado Springs, CO) 12/19/2021 3:44 PM
The form factor of this PCM-L06S15-C61,along with "may other" coincidences allow me to convert an old Rayovac 6-Volt lantern battery flashlight, with 80 Lumens, into a 4 lbs. flashlight with 14,000 Lumen output, and a 40 min. runtime with 2000+ cycle lifespan. I used a Bridgelux BXRC-50C10K1D7, a large copper heat sink and a COB with 312 LEDs mounted drawing 38.1 Volts at 2.1 Amps. Voltage converted by an Ebay 250 Watt "boost" switcher, de-rated to ~32% of claimed out capacity. My only concerns of the PCM was the relatively low discharge cut-off voltage of 2.0V +/- 0.05V, compared to the newer? PCB-LFP19V15A which a better cut-off of 2.3V +/- 0.1V. I would have attached photos, but that feature is not available.
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists