Protection Circuit Module (PCB) for 11.1v Li-Ion / 9.6V LFP Battery Pack (4.0A Limit) - For 18650 / 18500 3S1P battery pack (#6276)

Protection Circuit Module Specifications  for 11.1V  Li-ion / 9.6V LFP  Pack with 4.0 A current Limit 

All Li-Ion Battery packs must connect to a protection circuit module to protect Li-Ion Battery from overcharge, over discharge  and to prevent accidental battery explosion due to its extra high energy density. The protection circuit is specially designed for 11.1V  Li-ion / 9.6V LFP  Pack. It also can be use for Polymer Li-Ion battery sold by Batteryspace.
Please refer to the specification on how to wire the pcb to battery. 
Please be advised that this circuit will provide the following protections:

Please call us to specify the Battery type,Battery pack voltage, Over-charge protection voltage, Over-discharge protection voltage & Over-current detection Amperage 

• Over charge protection voltage for single cell: 3.80V ~ 4.4V +/- 0.05V
• Over discharge protection voltage for single cell: 1.90~3.3V +/- 0.1 V
• Maintains Li-Ion Battery pack's discharge current lower than 4.0A.
• Protect battery from short circuit and wrong polarity
• Separate Charge/Discharge terminal
• Over-current detection protection: 5A~20A
• Dimension: 50mm(2.0") x 16mm(0.6") x 3mm(0.1")
• Perfect for 18650 / 18500 3S1P battery pack