Protection Circuit Module for 37V Li-ion/Li-PO Battery Pack at 15A limit with thermostat (#9944)

Protection Circuit Module Specifications  For 37V Li-ion/Li-Po Battery  Pack
Model：PCM-LI37V15A
Voltage	Charging Voltage: DC 42V CC/CV (4.2V/1Cell)
Current	Current consumption for single cell: ≤20μA Max. continuous charging current: 15A Max continuous discharging current: 15A
Over Charge Protection	Over charge detection voltage: 4.25±0.05V Over charge detection delay time: 0.5S—2S Over charge release voltage: 4.05±0.1V
Over Discharge Protection	Over discharge detection voltage: 2.50±0.1V Over discharge detection delay time: 10-200mS Over discharge release voltage: 3.0±0.1V
Over Current Protection	Over current detection voltage: 2.50±0.1V Over current detection voltage: 100±10A Dection delay time: 5ms-60ms Release condition: Cut load
Short Protection	Detection condition: Exterior short circuit Detection delay time: 200-800us Release condition: Cut load
Resistance	Protection circuitry (B- To P-): ≤30mΩ
Temperature	Operating Temperature Range: -40～+85℃ Storage Temperature Range: -40～+125℃ Discharging Temperature Proctection: 65±5℃
Dimension (LxWxT)	63mm(2.5") x 55mm(2.2") x 7mm(0.3")
Weight	1.4oz
Specification

For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

• If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch. 
• To achieve balance, each cell in battery pack must has equal voltage within tolerance. When charger LED turn Green, allow 30 minutes for pack to balance before use.
• You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.