|
|
|
|
|
|
Powerizer e3 Lipo Balance Charger for 7.4V and 11.1V LiPo battery - CE / FCC
|
In Stock
Product ID # 8325 Part Number: CH-LIE3
|
Features
Feature |
- Powerizer e3 Charger is an ecomnomic, high quality 100-240V AC balance charger, designed for charging LiPo batteries from 2-3 cells in balance mode.
- There are no buttons on the charger, so simply wait the charger's green lights come on, that means the battery is ready. It takes about 1-1.5 hours to charge a 11.1V 2200mah Li-Po Battery Pack.
|
Input |
- Voltage: 100 -240VAC, 50/60Hz
- AC power plug type: USA
|
Output |
- The circuit power is 11W
- Cell Terminate Voltage: 4.2V
- Max Charging current: 1.2A
- Charge time = (Ah rate of battery pack x 1.5) / 1.2A charge current
|
Dimension(LxWxH) |
88mm X 57mm X 35mm (3.5" x 2.3" x 1.4") |
Weight |
103g (3.64 oz) |
Certification |
CE / FCC Listed |
ChargeProcedures
- Insert the AC power cord into the charger
- Insert the AC power cord into a wall socket. All LEDs will light green and flash red to indicate the charger is ready to charge
- Connect the battery balance wire to balance port which is in front of the charger. After 2 seconds, the charger detects the voltage of the battery and starts to charge.
- The charger starts charging. The LEDs will turn constant RED.
- 2-cell battery: Cell 1 and Cell 2 LEDs will turn constant RED.
- 3-cell battery: Cell 1, Cell 2 and Cell 3 LEDs will turn constant RED.
- Finshes Charging, the LEDs will turn constant Green.
- 2-cell battery: Cell 1 and Cell 2 LEDs will turn constant Green.
- 3-cell battery: Cell 1, Cell 2 and Cell 3 LEDs will turn constant Green.
- Unplug the battery from the charger and the charger status LED will stay Green and flash RED which indicates the charger is ready to charge another battery.
|
LED Indicator
- LED stays green and flashes red : The charger is ready to charge
- LED glows constant red: The charger is charging.
- LED glows constant Green: The charging process finishes.
- Error: all LEDs will flash red to alert you. In this case, please disconnected the power cord from the wall socket and unplug the battery from the charger.
- All LEDs flashes red once and stop 1 second in cycle: The battery connects incorrectly.
- All LEDs flashes red twices and stop 1 second in cycle: The charger encounters overload or short circuit.
- All LEDs flashes red 4 times and stop 1 second in cycle: The voltage of single cell is too high or too low.
- All LEDs flashes red 6 times and stop 1 second in cycle: There is a 300m (300 m = 328 yd) (300 m (300 m = 328 yd) = 328 yd (328 yd = 300 m))v difference of voltage between battery pack.
|
Warnings
- If you unplug the battery while charging, the charger will stop charging automatically and enter into standby status.
- If the charger encounters overload or short circuit while charging, the charger will stop charging and 3 LEDs will flash red.
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
|
|
|
Your Price: From $98.95 to $115.95
|
Product Reviews
|
|
|