Polymer Li-Ion Battery: 7.4V 10Ah (74Wh, 6A rate, 9059156-1C)

• 7.4V, 10000mAh Li-Ion battery , is made of 2 pcs Polymer Li-Ion Cell: 3.7V 10Ah , 10A drain rate
• The battery pack is wrapped by heavy duty heat shrink tube
• Optional for 1 pcA Fire Retardant Bag: 295mmx230mmx75mm --- Reduce the chance of damage if caught fire
  • This Fire Retardant Bag (Li-Ion Safer Bag) is intended to reduce the chance of damage in the event of catching fire.
  • Must locate & seal the battery pack in the bag  while charging / leaving without any attention 

• One PCB (6A) installed with the  battery pack and protects the battery from
  • Overcharge  / Overdischarge / Over drain / Short circuits
• One 7 Amp polyswitch is installed to limit  max. discharging current at 7A and to protect wrong polarity

• 6" length 18 AWG wires is installed with pack without connector
• Need additional connector? Please click here to order separately

       0.9" (22mm) thick x 2.5"(62mm) width x 6.3" (159mm) Long 

• The estimated charging time is 12.5 hours   

• Can be replacing 6V NiMH battery pack for halogen light
• Perfect for super-bright bike headlight of 6 -20W.  Can replace any 6V NiMH  or 7.2V Li-Ion battery.  
  • Light@ Motion:  Commutre and Solo Logic
  • Niterider: Headtrip  
  • Nightpro:   Elite, torch, KAMIKAZE
  • Cygolite:   Rover
  • Viewpoint
  • Nightsun Team

• Li-Ion battery may explode if misused.  We are not responsible for any damages or losses caused by misuse. 
• Always charge battery with attention.  Battery pack shall be placed in a fireproof place to avoid any accidents.
• Please check battery polarity before plugging battery into light. Never make wrong polarity connection.  Please check
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
•