Polymer Li-Ion Battery: 7.4V 1600 mAh (11.84Wh, 2A rate, 383562-2C) battery pack (0.96) *

• 7.4V 1.6Ah polymer Li-Ion battery pack is made of four Polymer Li-Ion Battery,3.7V, 800mAh with prewired 5A limited PCB
• Wrapped by thin plastic PVC

• One PCB (7.0A limit) installed with the battery pack and protects the battery from
  • Overcharge       (>8.4V)
  • Over discharge  ( <5.5V)
  • Over drain ( >  7.0 Amp)
  • Short circuits
• One 2 Amp polyswitch installed to limit  max. discharging current and to protect wrong polarity

65mm(2.5') x 40mm(1.6") x 20mm(0.8")    

• You may choose our Smart 7.4V Li-Ion Battery Charger (1.2A) to recharge this battery pack.  The estimated charging time is 2.0 hours
• If you connect two of these modules in parallel, you can build a 7.4V 3.2 Ah battery pack with a 4 Amp Max. discharge rate.
• Must read our battery knowledge: Why Li-ion battery pack has 0 voltage?  

• Perfect replacement for battery pack below.
  • Li-Ion 18650 7.4V 2400mah battery pack module with PCB (Protection IC)
  • Li-ion 18650 7.4V 2000mAh Li-Ion battery pack with PCB + 1.5A Smart charger
  • Li-Ion 18650 7.4V 2000mah Battery Module for Mini RC Car/Robot (2LI18650RPB01)
• 6V Bike lighting up to 15 W halogen light 
• External battery pack to run 6V DC devices. Such as digital camera or camcorder
• For X-mod mini racer that use a motor won't draw more than 2A

• Li-Ion Battery may explode if charging or discharging improperly. User must have knowledge on how to charge and discharge Li-Ion battery before making Li-Ion Battery Pack.
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings 
• For safety warning please see the link here
  
  
•