Polymer Li-Ion Battery: 7.4V 10Ah (74 Wh 6A rate, 896474-2C) battery module

• 7.4V 10Ah polymer Li-Ion battery pack is made of four pcs polymer Li-Ion cells  (5Ah) with PCB in 2S2P configuration
• Wrapped by heavy duty heat shrink tube

• One PCB  (6A) installed with the  battery pack and protects the battery from
  • Overcharge       (>12.6V)
  • Over discharge  ( < 7.5 V)
  • Over drain ( >  8 Amp)
  • Short circuits  
• 7 Amp polyswitch installed to limit max. discharging current at 7 A and to protect wrong polarity

• Option 1: Charge/Discharge terminal : 6" long 18AWG wire
• Option 2: Charge/Discharge terminal : 6" long 18AWG wire with Fuel Gauge
• Option 3:
• Battery is placed in Plastic Enclosure(10-1),
• with 4' long Trail-Tech female coaxis connector for discharge terminal, Included Trial-Tech Coaxis Male plug

      76mm (3.0")x 80mm (3.1") x 40mm (1.6")

• Smart Charger (1.2A) for 7.4V Li-ion/Polymer Rechargeable Battery Pack -- UL listed.  The estimated charging time is 12.5 hours 
• You can find various connector here
• Fire Retardant Bag: 295mmx230mmx75mm --- Reduce the chance of damage if caught fire
  • This Fire Retardant Bag (Li-Ion Safer Bag) is intended to reduce the chance of damage in the event of catching fire.
  • Must locate & seal the battery pack in the bag  while charging / leaving without any attention 

• Li-Ion Battery may explode if charging or discharging improperly. User must have knowledge on how to charge and discharge Li-Ion battery before making Li-Ion Battery Pack.
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings