Polymer Li-ion Battery: 11.1V 5.7Ah (63.27Wh) battery module (5.13) *

• 11.1V 5.7Ah polymer Li-Ion rechargeable battery made of 3 pcs Polymer Li-Ion Battery: 3.7V 5700 mAh (PL-H7051119)
• The battery pack is wrapped by heavy duty heat shrink tube

• One PCM (10A limited) is installed with the battery pack to protect battery from
• Overcharging beyond 4.25V/cell
• Over-discharge below 2.85V/cell
• Over drain ( >10 Amp)
• Balance battery's voltage within 4.25V +/-0.2V during charging
• One 7Amp polyswitch is installed to limit max. discharging current at 7A and to protect wrong polarity

• 6" length 18 AWG wires is installed with pack without connector
  • Black wire = Negative
  • Red wire = Positive
• Need connector for DIY? Please click here to order seperately
• Need a portable bag? Please click here to order

5.0"(126mm) L x 2.5"(62mm) W x 1.4"(35mm) H

• You may choose our  1.5A Universal Smart Li-Ion battery charger + the connector adaptor to recharge this battery pack.  The estimated charging time is 5.7 hours
• For international use. Please order the AC plug adaptor seperately.

• Perfect power source for 12V DC device
  • Burn time = 63.27Wh / wattage of device
• Can replace any 12V NiMH battery pack and 11.1 V (10.8V) Li-Ion battery packs for Bike lights, such as

• The battery can be replaced for most brands 10W HID bike light , such as.

  • Nitrider ( Firestorm ),
  • Light-motion's bikelight battery
  • Solo Logic etc.
  • Nightpro Extrem
  • TrailTech Eclipse ( 10W -30W)

• Li-Ion battery may explode if misused. We are not responsible for any damages or losses caused by misuse.
• Please check battery polarity before plugging battery into light.
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings