Polymer Li-Ion Pack with Fuel Guage: 3.7V 75.6Ah (279.7 Wh, 13A rate, 8570170-2C)

• 3.7 V 63 Ah pack is made by 6 pcs of Polymer Li-Ion cell of 3.7V 12.6Ah   in parallel connection.
• Fuel Gauge for PCB of 3.7V Li-Ion Battery Pack (1 cells pack) is installed on surface of battery pack
• Wrapped by heavy duty Heat shrink tube.
• Separated charging and discharging terminal. 

• 1x PCB (15A limited) is installed with the battery pack to protect battery from
  • Overcharging / Over-discharge / Over-drain / short circuit
  1x 13Amp polyswitch

• Charging terminal: 6" long 18 AWG with Standard tamiya male connector.   
• Discharging terminal: 6" long 16 AWG wire without connector. 
  • Red = Positive
  • Black = Negative

12.6A (1C rate)

13 Amp limited by Polyswitch

• You can use our smart charger below for charge the battery pack  
• Smart Charger (5A) for 3.7V Li-ion/Polymer Rechargeable Battery Pack (Alligator Clip plug) +Connector/Adaptor: Standard Female Tamiya with 14 awg Silicon wire ( 150mm).Charge time is about 15.75 hours 
• Smart Fast Charger (3A) for 3.7 V Li-ion Rechargeable Battery Pack .Charge time is about 31.5 hours.   

• Please never discharge the battery pack beyond its Max. rating
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings 
• For safety warning please see the link here
•