About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

PCM with Equilibrium function for 14.8V Li-Ion Battery Pack at 100A limit (#3123)

Your Price: $125.00
In Stock

Product ID # 3123
Part Number:

This protection circuit is specially designed for 14.8V Li-Ion Battery pack with 100A discharging rate. Different than normal PCB, it provides equilibrium function after battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps Li-Ion cells have longer service life.

Protection Circuit Module Specifications  For 14.8V Li-ion/Li-Po Battery  Pack
Charging Voltage DC: 16.8V CC/CV (4.2V/Cell)
Balance Voltage for single cell 4.2V±0.03V
Balance Current for single cell 108mA±5mA
Over-charge protection voltage 4.250 ± 0.025V
Over-discharge protection voltage 2.50 ± 0.070V
Over-current protection 350 ±30A
Maximal continuous Charge & Discharge current 100A
Current consumption for single cell ≤20uA/cell
Protection  circuitry  resistance (B+ TO P+) ≤20mΩ
Dimension 220x205x35mm; 8.67" x 8.1" x 1.4"
Specification Download Specification

For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category


  • If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch. 
  • To achieve balance, each cell in battery pack must has equal voltage within tolerance. When charger LED turn Green, allow 30 minutes for pack to balance before use.
  • You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists