PCM with Equilibrium function for 12.8V LFP Battery Pack at 60A limit (#7187)

Protection Circuit Board Specifications  For 12.8V LiFePO4 Battery  Pack
Model: PCM-LFP4S60A
No.	Test   item		Criterion
1	Voltage	Charging voltage	DC: 14.4V CC/CV (3.6V/1cell)
		Balance voltage for single cell	3.60V±0.05V
2	Current	Balance current for single cell	58mA±10mA
		Current consumption for single cell	≤100μA
		Maximal continuous Charging current	60A
		Maximal continuous discharging current	60A
3	Over charge Protection (single cell)	Over charge detection voltage	3.90±0.05V
		Over charge detection delay time	0.5S-2S
		Over charge release voltage	3.8±0.10V
4	Over discharge protection (single cell)	Over discharge detection voltage	2.00±0.1V
		Over discharge detection delay time	10-200mS
		Over discharge release voltage	2.30±0.1V
5	Over current protection	Over current detection voltage
		Over current detection current	250±50A
		Detection delay time	5ms-60ms
		Release condition	Cut load, auto recovery
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	200-800us
		Release condition	Cut load, auto recovery
7	Resistance	Protection  circuitry (B- TO P-)	≤20mΩ
8	Temperature	Operating Temperature Range	-40 to +85℃
		Storage Temperature Range	-40 to +125℃
		Over Temperature Protection (discharge)	75°C
9	Weight		7 oz
10	Dimenstion	L x W x T	120x80x20 mm
11	Specification

 For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

• If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch. 
• You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.