NiMH Rechargeable Battery: 36V 10Ah (360Wh, 3x10S/S, MH-D50) with 3 Charging Terminals

• NiMH Battery Pack: 36V 10Ah make by 30pcs of NiMH D size cell with 3 Charging Terminals for E-bike
• Include 3 to 1 Tamiya Connector
• Wrapped by heavy duty shrink wrap

• 36V ( working )    43V ( peak)

• 10Ah   or 360 wh

• Standard 1.8 A     Max. 5 A

• Standard rate: 10Amp  ( Recommended and warranted)
• Highest rate for continuous running:  30Amp   
• Max. Rate for short time: 50Amp (Not recommend as working rate)

• Option 1: Battery Pack Only
• 3 x Charging terminals:  16AWG with mini Tamiya connector male and  connect  with a 65^o thermostat.
• 3 x Discharging terminals: 14 AWG standard Tamiya connector male with 30A rating
• Include 3 to 1 Tamiya Connector
• Option 2: Battery Pack & Charger Combo
• Same battyer pack as option 1
• One Three channel smart charger in compact box is included

• 13.25" (337mm) L x 4" (102mm) W x 2.5" (64mm) H

• 12 lbs(5443 g)

• Smart Charger
• for estimated charging time of 7 hours, please choose our three channel smart charger  or three 7.2-12V Universal smart charger to recharge the battery pack

 Warnings

• Must charge three 12V 10Ah battery modules separately to keep better power balance
• Must charge the battery in a Non-flammable environment
• Must unplug 3 to 1 series Tamiya Discharging Connectors before charge this battery, to avoid circuit loop within three 12V 10Ah modules
• Battery should not be in fully charged status during transportation. Only remain 20%-30% charge is ideal
• Please don't discharging the battery pack below 30V  ( 1.0 V / cell)  Deep discharging may damage NiMH battery pack. 
• Charging battery immediately every time it is discharged. Never storage the battery pack at below 30V. 
• Please read more safety warning  at the link

• In order to achieve the best power balance during charger, you shall use one or three our 12V smart NiMH battery pack chargers to charge each 12V battery  modules.  Full charging time is about 7 Hrs . Must charge three 12V 10Ah battery module seperately
• Or, please order battery with charger combo option.
• Three mini tamiya connectors for charging inlets, which can be connected  to three channel charger
• Charging battery immediately every time it is discharged. Never storage the battery pack at below 30V. 
• Must disconnect the 3 to 1 Tamiya connector adapter during charging

• When discharging,  please use 3 to 1 Tamiya Connector to connect three 12V Modules in series and form a 36V 13Ah battery pack.