About Payment 
 Shipping & Cost
 FAQ's
 Warranty/Return
 Battery SDS
 Battery Terminology
 Testimonials
 Battery Knowledge
 
Privacy Policy
 Export restrictions

 


Shopper Award
Security Verified Seal

LiFeMnPO4 Prismatic Module: 3.2V 200 Ah, 10C Rate (640 wh) - UN38.3 Passed

Your Price: $370.00
In Stock

Product ID # 6064
Part Number:
LFP-G200Ah



Features  

Chemistry LiFeMnPO4 in prismatic case
Nominal Voltage   Average 3.2 V (working)  3.65V-3.8V (peak )  2.5 V ( cut-off low)
Capacity                  200Ah  (640 wh)
Energy Density 112.28Wh / Kg
Cycle Performance 2000 (80DOD%@0.2C rate, IEC Standard)
Terminals
  • Screw terminal, which may be varied based upon availability  (Excluded conjunction bar for output terminal & connection plate)
    • 4 x 2.5mm & 1 x 4.0mm Hex screw Terminal
    • Note:Positive terminal locate on one end, Negative terminal locate on opposite end
    • Material of the terminals on the cells are made from aluminum.
Operation Temperature
  • Charging:  0°C (32°F) - 45°C(113°F)
  • Discharging:  -25°C (-13°F) - 75°C(167°F) 90% at rated capacity at 1C discharge 
  • Self-discharging <3% monthly  
  • Temperature Durability of case =< 200°C(392°F)  
Charging current
  • Standard charging current 0.3 - 1C rate (100A) 
  • Best charging current <0.5C (100A)
Discharging current
  • Constant discharge current: 600A (3C rate)
  • Impulse discharge current (<10sec): 2000A (10C rate)
Dimensions(LxWxH) 142mm(5.6") x 57mm(2.24") x 500mm(19.7") with the purple cover  the height is 520mm (20.5")
Weight 5.7kg (12.0 lbs 8.0 Oz)
Acceptable Orientations
Notes
  • International Customers: Due to the high shipping cost , we are sorry we do not issue warranty, return or refund for this item. You are buying at your own risk.  
  • Please note: You're buying single Prismatic Module NOT screwed together by connection plates, if you want "4pcs Single Prismatic Module in pack" as attachment screwed together, please click hereto buy.
  • This battery must be shipped by Class 9 package, and there is extra handling fee, please add handling fee into shopping cart

Applications

small EV or big robot

Advantage

  • The Positive and negative terminals on these cells are placed on opposite ends of the cell. This make the current density more uniform within the cell to prevent current crowding near the terminals. This increases the performance and reduces the chance of premature aging due to hot spots within the battery. Not only does this result in lower internal resistance, but greater high current performance and superior cold weather performance.
  • Officially rated for 3.0C continuous discharge, lab testing has shown that these cells can deliver 100% of rated capacity when continually discharged at 4.5C (900A)
  • At -20°C (-4°F) these cells are capable of delivering 90% of their rated capacity (1.0C discharge)
  • Cells utilize a patented dual safety valve design which can safety with stand any abusive conditions. Tests have been done to confirm that these cells will not explode or catch fire during any of these tests. These include penetration with a steel rod ( a dead terminal short), crushing, short circuiting, dropping, over-charging, over-discharging and extremely high and low temperature storage.
  • Large terminal have 4 screws or rivets. This design reduces the possibility of a loose connection and eliminates the possibility of loose connection rotating compare to the one large screw on the LFP-P200AH (which is an earlier version battery)

Warnings

  • This LiFePO4 3.2V module does not have PCM for protection. You will need protection board to prevent from over charge , over discharge , short circuit and always store battery above 3.0V
  • Prismatic Lithium Ion Battery Safety Guidelines and Instructions
  • 3.2V LiFePO4 Prismatic battery pack shall be cut-off at 3.8V during charging and 2.5V during discharging. If over discharge below 2.5V, please recharge the pack right away. Otherwise the battery is over discharge and cannot recover!
  • International Customers: Due to the high shipping cost , we are sorry we do not issue warranty, return or refund for this item. You are buying at your own risk.

Warranty

  • One year limited
  • International Customers: Due to the high shipping cost , we are sorry we do not issue warranty, return or refund for this item. You are buying at your own risk.  

Related Products

  • Please order the Hex Key to assmebly battery packs
  • Please order connection plates.
  • Please order Positive / Negative Terminal Plates
  • To build a high voltage battery pack(>12.8V), please choose our advanced LFP BMS to monitor and control each module for safety and long service life.
  • Please note: You're buying single Prismatic Module NOT screwed together by connection plates, if you want "4pcs Single Prismatic Module in pack" as attachment screwed together, please click hereto buy.

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
---------------------------
What to consider when designing Lithium Batteries?
---------------------------
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
---------------------------
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
---------------------------
Lithium Battery Shipping Regulation
---------------------------
Recommendations on How to get ≤30% Rated Capacity for Shipping
---------------------------
Thermal Abuse Test for IEC62133
Mailing Lists