 |
 |
|
 |
|
|
LFP Polymer Cell: 3.2V 1100mAh (1004045-3C, 3.52Wh, 3.3A rate) - UN38.3 Passed
|
|
Minimum Purchase : 5000pcs
Product ID # 8870
Part Number: LFP-1004045-3C
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $9.65 |
| 21 to 50 | $9.45 |
| 51 to 100 | $9.25 |
| 101 or more | $8.95 |
|
|
Features
| Capacity |
- Voltage: 3.2V
- Nominal: 1100mAh , 3.52 Wh
|
| Cycle life |
> 2000 times @ 0.2C rate, IEC standard |
| Charging rate |
- Standard: 220mA (0.2C)
- Max. 1100mA (1C)
|
| Discharging Rate |
- Standard: 3300mA (3C)
- Max. 8800mA (8C) for less than 30 seconds
|
| Dimension(LxWxH) with tolerance +/- 0.5 mm |
46.5 mm (1.83") x 41 mm (1.61") x 10.2 mm (0.402") |
| Weight |
29 grams (1.02 oz) |
Please download the Specification here 
Warnings
- Don't use NiMH or Li-ion smart charger charge LiFePO4 cell/pack.LiFePO4 battery must be cut-off at 3.8V/cell when charging
- Wrong type of charger used will cause cell to explode. Batteryspace.com will not be responsible for damage
- You must limit discharging rate below Max rate
- Please see our damage test report to understand our specs and limit your application within specs
- Please read more info about LiFePO4 battery
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
Related Products
- If you build battery pack yourself, you MUST install PCB/BMS for protection with the following feature:You also need Smart LiFePO4 Battery charger to recharge this battery.
- 3.9V/cell over-charge protection
- 2.3V/cell over-discharge protection
- Max current over-drain protection
- Short circuit protection.
- For build 6.4V-19.2V pack without PCB/PCM installed, Must use balance charger belowBatteryspace.com won't liable for any miss-use due to any other brand of PCB applied
|
|
Product Reviews
|
|
|