About Payment 
 Shipping & Cost
 FAQ's
 Warranty/Return
 Battery SDS
 Battery Terminology
 Testimonials
 Battery Knowledge
 
Privacy Policy
 Export restrictions

 

Customer Reviews

5 Star Excellence award from Shopper Approved for collecting at least 100 5 star reviews


Security Verified Seal
 

Battery Management System ( BMS) Kit for LiFePO4 Battery Pack with LCD Monitor (#13196)


MonitorShunt
Your Price: $380.00
In Stock

Product ID # 13196
Part Number:
BMS-ABC

Lead Time: 1 week

Personalizations

* denotes required field

*
*
*
500A Relay*
Temperature Setting*
Slave module version. (Need order separately)*
Cable between BMS-EP128 to slave module*

Features  

  • This battery management system is designed to support from a 4 cells (12.8V) LFP Prismatic module of 40Ah , 60Ah,  100Ah or 200Ah upto a maximum of 80 cells, 500Ah capacity and max of 500A discharge with visual display function.
  • A distributed system measuring voltage and temperature of each cell
  • Daisy chain connection supporting up to 80 cells
  • Cell balancing
  • Integrated Ground Fault Detection and alarm output
  • Pack voltage measurement
  • Pack SOC calculation
  • Low voltage and high voltage alarm cutoff outputs
  • Optional CANBUS or MODBUS communication output
  • Composite video output
  • Perfect for Electric Car, Electric Golf Cart or other application where you are looking to replace the original lead acid battery with LiFePO4 cell to reduce the weight, improve cycle life and newer technology.

Please download the Specification here

  • Main Screen Displayed: Pack voltage, pack current, Battery Capacity, Alarm Message, cell number, cell voltage and temperature.
  • CPU Power: 9-16V, 200mA
  • Battery Voltage: 12V to 500V
  • Shunt Input: 500A = 50mV
  • Pack Voltage Resolution: 0.2V
  • Current Resolution: 0.1A
  • Temperature Range: -4F to +158F or -20°C to +70°C
  • Video Output: Composite Video, Color, NTSC, RS-170
  • Measurement Accuracy: Better than 1% of Full Scale
  • Number of Cells Supported: up to 80
  • Cell Voltage: 2.2 to 4.5V
  • Balancing Threshold Voltage:3.55V
  • Balancing Current: 0.5A
  • Alarm Output Current: 4A Surge for 100mS; 2A Continuous
  • Ground Fault Detection: 2mA (5000 Ohm/Volt)
  • CPU Size: 5.70 x 2.60 x 1.80 in
  • Shunt Size: 3.25 x 1.75 x 1.75 in
  • user manual  
  • BMS Step-by-step Setup Guide
  • Canbus specification
  • MODBus specification

Package Content

  • 1 x Master Controller Module (Size 146 x 68 X 50 mm)
    • The Master Module functions are:
      • Communicate with each Slave Module on monitoring the max/min voltage, max/min current and temperature & perform balance function on each cell.
      • Provide all necessary Data to Display on the LCD Display
      • Provide connection to the Shunt to measure the current
      • Provide connection to the momentary switch to change the information being display on the LCD Display
      • Provide signal to open the Discharge Relay, Charge Relay (if not use with a CANbus charger) to protect the battery pack from over charge, over discharge or high temperature
      • Provide connection to a CANbus charger ( no charge relay will be need!)
  • 1 x 7" LCD Display:
    • Pack voltage, pack current, state-of-charge, individual cell voltage and temperature readings and alarm messages
  • 1 x Shunt (to measure current upto 500A max) (Size 82 X 45 X 45 mm)
  • 1 x momentary switch
  • 1x cable between CPU (BMS-EP128) to slave sense board
  • 5pcs 2' long Black 18AWG connection cables (contact us if longer cables needed)
  • 4pcs 2' long Red 18AWG connection cables (contact us if longer cables needed)
  • This kit does not include relay, relay is optional.
  • This Kit does NOT include any slave modules (BUT you MUST order separately) 

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
---------------------------
What to consider when designing Lithium Batteries?
---------------------------
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
---------------------------
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
---------------------------
Lithium Battery Shipping Regulation
---------------------------
Recommendations on How to get ≤30% Rated Capacity for Shipping
---------------------------
Thermal Abuse Test for IEC62133
Mailing Lists