About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Intelligent Digital Balance Charger/Discharger for (NiMH/NiCD 1-15 cells, LiPo/Li-Ion/LiFePO4 1-6 cells, SLA 2V-20V) Battery pack

Your Price: $95.95

Product ID # 1156
Part Number:

Quantity Discounts

5 to 20$93.07
21 to 50$91.15
51 to 100$89.23
101 or more$86.35


  • Microprocessor controlled
  • With LCD Panel (Please click picture to view)
  • Charge / Discharge the 1.2V-18V (1-15 cells) NiMH/NiCD battery pack
    • Delta-peak sensitivity: Automatic termination program based on principle of the Delta-peak voltage detection.
      • For NiCd pack; Detect Minus delta V ≥ 12 mV/cell  
      • For NiMH pack For NiCd pack; Detect Minus delta V ≥ 7 mV/cell   
    • Automatic Charging current limit: Limit the charging current when charging NiMH/NiCd battery
    • 0.5C recommend charge rate for NiMH/NiCd pack
    • Capacity limit: Limit excessive capacity automatically by setting the maximum value.
    • Processing time limit (Safe timer Setting): limit the process time to avoid any possible defect
      • Safe timer calculation =  (Capacity mAh rate / charging current A rate) / 11.9
    • Charge terminal:two female 4.0mm female Banana plug (Black = Negative, Red = Positive)
    • Note:Excluded The temperature sensor connector. Please make sure the pack have a thermostat installed
  • Charge / Discharge the 7.4V-22.2V (1-6 cells) Li-Ion/Li-Ion Polymer, 6.4V-19.2V (1-6 cells) LiFePO4 pack Battery pack with/without PCB 
    • Balance each cell voltage is or less than 30mV after fully charged  
    • Balance individual cell during discharging
      • Automatically Shut off after detect the voltage of abnormal cell indicated by ERROR message
    • Charge terminal:  5 JST male sockets installed in the charger for recharging from 2S to 6S Li-Ion/Li-Ion Polymer/LiFePO4 pack separately
      • 3 pins male JST socket for charging 2 cells (2S) pack (7.4V pack Li-Ion pack / 6.4V LiFePO4 pack)
      • 4 pins female JST socket for charging 3 cells (3S) pack (11.1V pack Li-Ion pack / 9.6V LiFePO4 pack)
      • 5 pins male JST socket for charging 4 cells (4S) pack  (14.8V pack Li-Ion pack / 12.8V LiFePO4 pack)
      • 6 pins male JST socket for charging 5 cells (5S) pack  (18.5V pack Li-Ion pack / 16.0V LiFePO4 pack)
      • 7 pins male JST socket for charging 6 cells (6S) pack  (22.2V pack Li-Ion pack / 19.2V LiFePO4 pack) 
  • Charge / Discharge 2V-20V (1-10 cells) SLA Battery pack
    • Cyclic charge/discharging : 1 to 5 and continuous process of charge --> discharge / discharge --> charge for battery refreshing.  
    • Data storage (Store up to 5 packs in memory)
    • Input power monitoring
    • Note: You must connect the battery to charger's output terminal while pefrom charging

Specification & User Manual

  • AC Input Voltage: 100v -240DC 50/60Hz
    •  Included 1 pcs AC plug adaptor. (Please click picture to view)
  • DC Input Voltage: 11~18vDC
    • Excluded 1 pcs Car plug adaptor. (Please click picture to view) 
    • Input terminal:5.5mmx2.5mm Barrel female plug or via attached alligator plug
  • Circuit power: Max Charge: 50W / Max Discharge: 5W
  • Charge Current Range: 0.1~5.0A
  • Discharge current range: 0.1~1.0A
  • Dimension(LxWxH):  138mm(5.4") x 148mm(5.8") x 48mm(1.8")
  • Weight:  1.4 Lb (650grams)
  • User Manual

Accessories Included

  •  Included one 1' long 18AWG Connector Adaptor: from 4.0mm Male Banana plug to Standard Dean Male plug. (Please click picture to view) 
  •  Included one  3" long 18AWG Connector Adaptor: from Standard Dean Female plug to alligator Clip. (Please click picture to view) 
  •  Included one  4" long 22AWG Connector Adaptor: from Standard Dean Female plug to Male Hi-Tec plug. (Please click picture to view)
  •  Included one  4" long 22AWG Connector Adaptor: from Standard Dean Female plug to Male BEC plug (Please click picture to view)
  •  Included one  4" long 22AWG Connector Adaptor: from Standard Dean Female plug to 3.0mm Male DC plug(Please click picture to view)
  •  Included one 1' long 18AWG Connector Adaptor: from 4.0mm Male Banana plug to 5.5mm x 2.5mm Barrel Male plug (Please click picture to view) 
  •  Included one  pc Large alligator Clip for easy DIY (Please click picture to view) 

Related Products

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists