High Power Polymer Li-Ion Battery: 25.9V 21Ah (543.9 Wh, 30A rate) (44.1)

• 25.9 V 21 Ah pack is made by 7 pcs Polymer Li-Ion cell of 3.7V 21Ah  
• Wrapped by heavy duty heat shrink tube

• 1x PCM (30A limited) is installed in the battery pack to balance charging and protect battery module from
  • Over-charge       (> 30.27 V)
  • Over-discharge  ( < 17.5V)
  • Over drain ( > 30 Amp)
  • Short circuits
  • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

• PL-1055275-7S-TM:
• Charging terminal: 6" long 16 AWG with tamiya male connector.
• Discharging terminal: 6" long 12 AWG wire
  • Red = Positive
  • Black = Negative
  • Need connector for DIY? Please click here to order.
• PL-1055275-7S-TM-V1:
• Charging terminal: 14.0" 16 AWG with 4 Pins Male Cannon Plug (pin 1&2=Naegative, pin 3&4=Positive)
• Discharging terminal: 14.0" 12 AWG with 40A Anderson Connector
  • Red = Positive
  • Black = Negative

  11.0"(280mm) x 3.7"(94mm) x 3.0"(75mm)  

• Please use either 25.9V Li-Ion smart charger below.
  
  • For fast charging (5.25 hrs) , You may use 6.0A Smart Li-ion battery charger + the connector adapter
  • You may use 3.0A Smart Li-ion battery charger to fast charge with 10.5 hrs charge time.   
  • You may use Smart Charger (2.8A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack with 11.25 hrs charge time 
• Don't combine charge terminal for charging at one time.

• Please never discharge the battery pack beyond its Max. rating
• For safety warning please see the link here

• Limited Warranty: Repair or exchange only within 30 days.