 |
 |

|
 |
|
|
High Power Polymer Li-Ion Battery: 14.8v 10Ah 70A Discharge Rate (148Wh, w/o PCB) for DIY (12.0)
|
In Stock
Product ID # 413 Part Number: HPL-9759156-4S-WR
Quantity Discounts
Quantity | Amount |
5 to 20 | $238.57 |
21 to 50 | $233.65 |
51 to 100 | $228.73 |
101 or more | $221.35 |
|
|
Features
*Important Shipping Regulation |
This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more... |
Packing |
|
Voltage |
14.8v (working) 16.8V ( peak) |
Capacity |
10 Ah (148wh) |
Prewired |
- Charge terminal
- 2" wire with 5 pin Female JST plug
- Discharge terminal
- 4" 8AWG open end wire
- Black wire = Negative, Red wire = Positive
|
Max. Discharging Rate |
70Amp limited by 8AWG wire (Please don't drain over 70A) |
Dimensions (LxWxH) |
172mm(6.8") x 70mm(2.8") x 60(2.3") |
Weight |
885ams (1.9Lb) |
Applications
- 14.8VDC device with 70A Max current drawn
- Superior Battery Power and Battery Strength makes your RC car or Aircraft a true champion
- The polymer battery is excellent for ebike , RC robot and other high drain DC device up to 70A
|
Warnings
- No PCB installed, please don't use our 14.8V smart Li-Ion charge the pack.
- Again, No PCB protection in this Polymer Li-Ion Battery pack. You must control discharging current and cut-off voltage by yourselves.
- Never discharge battery beyond 70A
- Never discharge battery below 10.0V (2.5V/cell)
- Recharge battery pack immediate after use
- Li-Ion Batteries may explode if charged or discharged improperly.
- The end user must have the technical knowledge necessary to charge and discharge Li-Ion batteries before making Li-Ion Battery Packs
- There is no PCB in discharging terminal. You must cut-off power before battery voltage drop to 2.5V /cell.
- Never discharge battery to zero voltage which will damage battery immediately.
- Always charge battery after use and for storage
- Please read more safety warning about Li-ion battery
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
Related Products
- In order to keep the 14.8V 10000 mAh polymer li-ion pack balance while charging, please choose the chargers below
- Fire Retardant Bag: 295mmx230mmx75mm --- Reduce the chance of damage if caught fire
- This Fire Retardant Bag (Li-Ion Safer Bag) is intended to reduce the chance of damage in the event of catching fire.
- Must locate & seal the battery pack in the bag while charging / leaving without any attention
- Need connectors to DIY? Please order here
|
|
|
Your Price: From $315.00 to $330.00
|
|
|
|
Your Price: From $98.95 to $115.95
|
Product Reviews
|
|
|