 |
 |

|
 |
|
|
Hi-Power Polymer Li-Ion Battery Combo: 7.4v 4000mAh (22.2Wh, 10-12C, w/o PCB) / Intelligent Charger (4.8)
|
In Stock
Product ID # 3374 Part Number: CH-LI0103BLC05
Quantity Discounts
Quantity | Amount |
5 to 20 | $91.13 |
21 to 50 | $89.25 |
51 to 100 | $87.37 |
101 or more | $84.55 |
|
|
Features
*Important Shipping Regulation |
This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more... |
Package |
|
Voltage |
7.4 v (working) 8.4 V ( peak) 5.5 V ( cut-off) |
Capacity |
4 Ah ( 29.6 wh) |
Prewired |
|
Max. Discharging Rate |
40 Amp. (Continuous 10 C rate), 60 Amp Max ( 15C Max for short time) |
Battery Dimensions(LxWxH) |
142mm (5.5") x 46mm (1.8") x 12.35mm (0.5") |
Battery Weight |
192g (6.8 oz) |
Applications
- The polymer battery is excellent for ebike, RC robot and other high drain DC device up to 40A
- Superior Battery Power and Battery Strength makes your RC car or Aircraft a true champion
- Can fit in most RC car stock tray ( 6x Sc size) and Replace 7.2V NiMH battery pack with 50% less weight
- Can fit Losi XXX T- Novak Cyclone, Trinity Cobalt Pro stock, Spektrum DX3 radio w/ Z590 Hi-Torque Race Servo and SR3000 Receiver
- Comparision with NiMH 7.2V 4.2Ah Pack
|
Size (in) |
Weight |
Capacity |
Max Drain |
Volt Flat |
Cost |
RC racing |
7.4V 4Ah Polymer |
5.4x2x0.6" |
190 g |
3 wh |
48A |
7.2V |
Higher |
Faster |
7.2V 4Ah NiMH |
5.4"x1.9"x1" |
375 g |
3 wh |
40A |
6.6V |
lower |
slower |
|
Warnings
- This Li-polymer battery pack has no PCB or PCM installed, must be charged by Intelligent Balance charger.
- Never discharge the battery pack below 5.0V(2.5V/cell).
- Always charging the battery immediately after use. We are not responsible for any damage caused by miss-use.
- Please read more safety warning about Li-ion battery
|
|
Product Reviews
|
|
|