5 Star Excellence award from Shopper Approved for collecting at least 100 5 star reviews

Custom Polymer Li-ion Battery: 3.7V 4250mAh (15.725wh) Molex connector

Your Price: $45.94

Build to order

Product ID # 4041
Part Number: CU-PL-54671002-MOLEX

Lead Time: 5 Business Days / Hazmat handling fee required*

Quantity:

Add to a new shopping list

Email this page to a friend

Quantity Discounts

Quantity	Amount
5 to 19	$44.56
20 to 49	$43.64
50 to 99	$42.72
100 or more	$41.34

*Important Shipping Regulation	This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more...
Packing	Customize 3.7V 4250mAh Li-Ion Battery pack is made of 3.7V 4250 mAh (PL5467100) with Built in Protection IC (PCB) & a 70 degree thermistor to protect battery from over charge and over discharge with Molex connector (51004-3P) Use only one pc of thin white shrink wrap to wrap pack The wire must come out on left hand side top of battery pack
Voltage	Voltage: 3.6V (working), 4.2V (peak), 2.5V(cut-off)
Capacity	4250 mAh, 15.7 Wh
Protection	One PCB (2.0A) installed with the battery pack and protects the battery from Over charge (>4.2V) Over discharge ( <2.5 V) Over drain ( >2.0 Amp) Short circuit
Prewired	10cm 24AWG wire with 3 pins molex connector (51004-3P) Pin 1= P- & thermistor Pin 2 = P+ Pin 3 = thermistor
Max. Discharging Rate	2.0 Amp limited by PCB
Dimensions (LxWxH)	102mm (4.01") x 68mm (2.7") x 7.4mm (0.29")* Note: 7.4mm is the absolute maximum thickness
Weight	98 grams (3.5Oz)
Charger	You can use our 1.5A 3.7V LI-ion Chargerto recharge the battery pack, charge time is about 4.25 hours
Warning	Li-Ion battery may explode if misused. We are not responsible for any damages or losses caused by misuse. Always charge battery with attention. Battery pack should be placed in a fireproof place to avoid any accidents. Please don't use the battery modules to make series connection or parallel connection with more than 2 packs, otherwise battery service life may be reduced. For safety warning please see the link here California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

Product Reviews

(0 Ratings, 0 Reviews)

---------------------------

What to consider when designing Lithium Batteries?

---------------------------

Bluetooth Technology for Lithium-ion/LiFePO4 Batteries

---------------------------

UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.

---------------------------

Lithium Battery Shipping Regulation

---------------------------

Recommendations on How to get ≤30% Rated Capacity for Shipping

---------------------------

Thermal Abuse Test for IEC62133


	Email Address: General Consumer Newsletter RC & Airsoft Newsletter EV/Ebike Newsletter Design Engineers Newsletter

Custom Polymer Li-ion Battery: 3.7V 4250mAh (15.725wh) Molex connector

Quantity Discounts

Related Products

Smart Charger (0.5A) for 3.7V Li-ion/Polymer Rechargeable Battery Pack - CE Listed -

Smart Charger (1.8A) for 3.7V Li-ion/Polymer Rechargeable Battery Pack -

Polymer Li-Ion battery: 3.7V 2500mAh (9.25 Wh, 2A rate, 544792-2C) - UN38.3 Passed

Smart Charger (3.0A) for 3.7V Li-ion/Polymer Rechargeable Battery Pack - CE Listed

Polymer Li-Ion Battery: 3.7V 6.2Ah (23Wh, 5A rate, 325085-2C) battery module

Polymer Li-Ion Battery: 3.7V 6400mAh (23.68Wh, 6A rate, 7548168-1C)

NiCd Battery Pack: 10.8V 3000mAh (3x3S/S, Flat, CD-C3000B) rechargeable battery

Polymer Li-Ion Battery: 3.7V 5Ah (18.5Wh, 5A rate, 6767100-1C)

Lithium18650 Rechargeable Cell: 3.6V 3350mAh (12Wh, Button Top, PCB Protected, Panasonic Cell NCR18650B) - UN38.3 Passed

Polymer Li-Ion battery: 3.7V 9600mAh (35.5 Wh, 2A rate) battery

Custom Polymer Li-Ion Battery: 3.7V 5Ah (18.5Wh, 2A rate, 896474-2C) - UN38.3 Passed

Li-Ion 18650 Battery: 3.6V 6.7Ah (24.12Wh, 2A rate, 2E/E, NCR18650B) - UN38.3 Passed / IEC62133: 2013 Listed

Product Reviews