Custom Polymer Li-Ion Battery: 22.2v 5Ah (111Wh, 2A rate, 896474-2C) (9.0)

• Customize 22.2V 5000 mAh Polymer Li-Ion Pack made by 6 pcs Polymer Li-Ion Battery: 3.7V 5000 mAh (PLH-896474)with PCB (10A limited) 
  • Wrapped by thin Heat shrink tube
  • PCB and polyswitch must locate on flat side of battery

     5000 mAh   ( 111 wh)

•  One PCB (10A limited) installed with the battery pack and protects the battery from (note: remove the fuel gauge connector to reduce overall height) 
  • Over-charge       (> 25.2 V)
  • Over-discharge  (< 15V)
  • Over drain (> 10 Amp)
  • Short circuits
• 2 Amp polyswitch installed to limit  max. discharging current and to protect wrong polarity

• Charge /Discharge terminal: 6" 24 AWG open end wire

• Choose our 1.5A  Smart Li-Ion battery charger to recharge this battery pack.  The estimated charging time is 6 hours
• Need a connector ? please find one here

• We are not responsible for any damages or losses caused by misuse (included but not limited to: misuse, any changes of this battery pack, mis-assembling battery packs)
• Please never discharge the battery pack beyond its Max. rating
• Always check the polarity before connecting to your device.
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings