About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Custom Li-Ion Power Battery: 888Wh with 12V/ 5V,/3V DC & 110V AC Outputs and Built in AC/DC Smart Charger (72.0)

Your Price: Call to Order
Special Parts Required, Call to Order.

Product ID # 4066
Part Number:

Lead Time: 4 weeks

888Wh Li-Ion Power station is designed as mobile power for military, field test and mobile electronics which need longer running time both in AC and DC.  It can run any electronic device at 110VAC, 3V, 5V , and 12V DC with exceptional long time

  • 60W Light for  25 hours per charging
  • 40W Laptop computer for 20 hours per charging

The battery station can be recharged via Solar panel, 12VDC from car and 110- 240V AC , almost anywhere

*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yet.  Read more...





  • 3 pcs 4pin female Canon plug connector for  for 3.3VDC, 5VDc &12VDC output Terminal 

Voltage         Voltage: 11.1V (working)   12.6V ( peak)  7.5V ( cut-off)
Capacity         80 Ah ( 888 wh)
  • Four  PCM (10 A)  with balancing function are installed with the  battery pack and protects the battery from
  • Overcharge       (>12.6V)
  • Over discharge  ( < 7.5 V)
  • Over drain          ( > 40 Amp)
  • Short circuits
  • Four 7 Amp polyswitch  installed to limit  max. discharging current at 28 A
  • Charger terminals:  Two charging terminal with built in smart charging circuit inside box
    1. DC charging terminal with 2 pin Canon connector  for charging from solar panel with 4Amp Max charging current, 18V Max charging voltage.
    2. 2" long Trail-Tech female plug for charging by included AC charger (10+ charging time)

    1. Car light socket is installed on the box to accept charge from 12V DC power
    2. One 110VAC to 12V DC  power supply (150 W ) is included
  • Discharging terminal:Four DC output terminals are built in
    1. 12VDC via Car lighter socket
    2. 3VDC via 4 pins Cannon male connector
    3. 5VDC via 4 pins Cannon male connector
    4. 12VDC via 4 pins Cannon male connector
  •  You may connect the Car lighter socket by included 4' long coil cord male car lighter plug (15Amp Max Discharge current)

  • DC-AC inverter:  one 150W DC-AC inverter is included.  Connect it to car socket , the battery box can provide 110V AC to run any device under 150W  

Max. Discharging Rate
The included 2/4pin female Canon plug attached to Solar charge terminal and 3V,5V,12V Terminal


Dimension (LxWxH)
  • Battery Box:  (LxWxH); 380mm (15.0") x 260mm (10.2") x 115mm(4.5"), Weight: 7 kg
  • AC-DC Power Supply Dimension: 225mm (8.9") x 150mm (5.9") x 60mm (2.4"), Weight: 1 kg


  • DC/AC Inverter Dimension: 135mm (5.3") x 100mm (3.9") x 45mm (1.8"), Weight: 0.5Kg

Weight       6.8 lbs (3175.14 g)
Charger (Built in )
  • Built in smart Charger circuit from solar panel  12-17V 8A max. and cut-off power when battery is full
  • Built in smart charger circuit from 12V (10A) DC power supply and cut-off power when battery is full


  • Li-Ion battery may explode if misused. We are not responsible for any damages or losses caused by misuse (including but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling battery packs).
  • Always charge battery with attention.  Battery pack shall be placed in a fireproof place to avoid any accidents.
  • Please check battery polarity before plugging battery into light. Never make wrong polarity connection.
  • For safety warning please see the link here
  • California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
Battery Pack Configuration


Operation Instruction    Please click here to view the operation instruction



3VDC, 5VDC, 12VDC Output terminal & DC On-Off switch 


AC charging/Solar charging LED indicator & Solar charging terminal


12VDC Car lighter Socket terminal


Trail-Tech female plug charging terminal 


LED indicator of the included 11A AC charger




Related Products

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists