Custom Polymer Li-Ion Battery: 25.9V 12.6Ah (326.34 Wh. 18A rate, 8570170-2C)

• 25.9 V 12.6 Ah is made by 7 pcs Polymer Li-Ion cell of 3.7V 12600mAh batteries
• Battery pack is installed in Water Proof / Fire Retardant aluminum Enclosure: 125 x68x196 (mm) (BX-AC-120062-180)
• Fuel Gauge is on cover of the enclosure
  • Touch the switch on the display , you can monitor the energy level of battery pack 

• One PCM (30A limited) is installed in the battery pack to balance charging and protect battery module from
• Overcharge (> 30.27 V)
• Over-discharge ( < 17.5V)
• Over drain ( >30 Amp)
• Short circuits
• Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
• Two 9 Amp polyswitch installed to limit discharge current at 18 Amp
• Charging terminal: 6" long 21 AWG with tamiya male connector.
• Discharging terminal: 6" 12Awg Special Molex#0428160212/0428150011 Connector

200mm(7.9") x 125mm(4.9") x 67mm(2.6") 

• Please use either 25.9V Li-Ion smart charger below.
• For fast charging (3.15 hrs) , You may use 6.0A Smart Li-ion battery charger + the connector adaptor
• You may use 3.0A Smart Li-ion battery charger to fast charge with 6.3 hrs charge time.
• You may use Smart Charger (2.8A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack with 6.75 hrs charge time.
• Must plug the charger and the connector adaptor via only charge terminal with correct polarity.
• Batteryspace.com will not be responsible for any damage caused by missusing.

• Please never discharge the battery pack beyond its Max. rating
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

• Limited Warranty: Repair or exchange only within 30 days.
•