Custom Polymer Li-Ion Box Battery: 25.9V 12.6Ah (326 Wh 18A rate, 8570170-2C) in Aluminium Enclosure + Fire Retardant Bag

• Customize 25.9 V 12.6 Ah pack is made by 7 pcs Polymer Li-Ion cell of 3.7V 12600mAh batteries
• Battery pack is installed in Water Proof / Fire Retardant Aluminum Enclosure: 125 x68x196 (mm) (BX-AC-120062-180)

• Included 1x A Fire Retardant Bag: 295mmx230mmx75mm --- Reduce the chance of damage if caught fire
  • This Fire Retardant Bag (Li-Ion Safer Bag) is intended to reduce the chance of damage in the event of catching fire.
  • Must locate & seal the battery pack in the bag  while charging / leaving without any attention 

• One PCM (30A limited) is installed in the battery pack to balance charging and protect battery module from
• Overcharge (> 30.27 V)
• Over-discharge ( < 17.5V)
• Over drain ( >30 Amp)
• Short circuits
• Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
• Two 9 Amp polyswitches installed to limit discharge current at 18 Amp
• Charging terminal: 6" long 21 AWG with tamiya male connector.
• Discharging terminal: 6" long 16 AWG wire
  • Red = Positive
  • Black = Negative
  • Need connector for DIY? Please click here to order.

200mm(7.9") x 125mm(4.9") x 67mm(2.6") 

• Please use either 25.9V Li-Ion smart charger below. 
• For fast charging (3.15 hrs) , You may use 6.0A Smart Li-ion battery charger + the connector adapter
  
• You may use 3.0A Smart Li-ion battery charger to fast charge with 6.3 hrs charge time.
• You may use Smart Charger (2.8A, CE listed, UL approved) for 25.9V Li-ion/Polymer Rechargeable Battery Pack with 6.75 hrs charge time.
• Must plug the charger and the connector adapter via only charge terminal with correct polarity.
• Batteryspace.com will not be responsible for any damage caused by misusing. 

• Don't combine charge terminal for charging at one time.
• If you connect two of these modules in parallel, you can build a 25.9V 25.2 Ah Battery pack with a 28 Amp discharge rate with suitable wiring.
  • Must charge each module separately, please don't combine charge at a time.
• Optional for Fire Retardant Bag: 295mmx230mmx75mm.Please click here to order.

• Replace 24V NiMH battery pack for Radio
• Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to know more the advantages

• Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by using battery packs.
• Please never discharge the battery pack beyond its Max. rating
• We reserve the right to not sell the battery to any one if we feel they cannot handle Li-Ion battery safely
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
• 

• Limited Warranty: Repair or exchange only within 30 days.