 |
 |
|
 |
|
|
Custom Polymer Li-ion Battery: 3.7V 3100mAh (11Wh, 2A rate) with JST Connector
|
|
In Stock
Product ID # 3266
Part Number: PL325085P4HWR-EH3P
Lead Time to be determined!
|
| Important Shipping Regulation |
This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more... |
| Battery |
|
| Voltage |
Voltage: 3.7V (working) 4.2V ( peak) 3.0V(cut-off) |
| Capacity |
3100 mAh |
| Protection |
- One PCB (2.0A) installed with the battery pack and protects the battery from
- Overcharge / Over discharge / Over drain / Short circuits
- No Polyswitch
- 10K Thermistor
|
| Terminal |
- 3" - 24 AWG wires to JST-EH3P connector.
- JST connector layout:
- Pin 1 = Batt +
- Pin 2 = Thermistor
- Pin 3 = Batt - and thermistor
|
| Charge Current |
≤2000mA |
| Discharge Current |
≤2000mA , limited by the PCB |
| Dimensions (LxWxH) |
3.5” x 2” x 0.3” (88.9mm x 50.8mm 7.62mm) |
| Weight |
2.11 Oz (60 grams) |
| Related Product |
|
| Warning |
- Lithium battery may explode if not used properly. Please refer above specification. We are not responsible for any damages or losses caused by misuse, which include but are not limited to: over charge, over discharge, over current, any changes of this battery pack, disassemble battery pack) .
- Always charge battery with attention. Battery pack should be placed in a fireproof container during charge to avoid any accidents.
- Please check battery polarity before connecting battery with a device. Never make wrong polarity connection.
- For safety warning please see the link here
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
| Included JST connector |
|
|
Your Price: From $19.95 to $31.25
|
|
Your Price: From $19.95 to $24.95
|
|
|
|
|
|
|
|
|
Your Price: Not for resale
|
|
Your Price: From $24.50 to $29.50
|
|
|
Your Price: From $24.95 to $29.95
|
|
Product Reviews
| (1 Rating, 1 Review) |
Average Rating:
|
great service
debra t.
(BC, Canada)
12/2/2016 1:21 PM
came right away and was just what we needed
|
|
|
|