Custom Polymer Li-Ion Battery: 11.1V 4250mAh (47.17Wh,8A rte, 5567100-2C) with Fuel Gauge & Cigarette Lighter Socket---UN38.3 Passed

• Custom 11.1V 4250 mAh Polymer Li-Ion pack  made with 3 pcs  Polymer Li-Ion cell of 3.7V 4250mAh (5567100) in series connection
• The battery pack is wrapped by black PVC shrink tube
• Fuel Gauge display is "8.0" long free hanging" on outside of the pack.
• Wiring:
• Charging terminal: 8.0" 16AWG open end wire
• Discharge terminal:8.0" 16AWG with Cigarette Lighter Socket

Protection

• 1 x  PCM  (10A) with balance function installed with the  battery pack and protects the battery from
• Over-charge       (>12.6V)
• Over-discharge  ( < 7.5 V)
• Over-drain ( >  10 Amp)
• Short circuits
• 2 x 4.2 Amp polyswitch  installed to limit  max. discharging current at 8A  
• 1 x Fuel Gauge for PCB of 11.1v Li-Ion Battery Pack (3 cells pack)
  • Touch the switch on the display , you can monitor the energy level of battery pack 

-20 ^oC to 50 ^oC

108mm (4.3") x 76 mm (3.0") x 24 mm (0.9")

• You may choose our  1.5A Universal Smart Li-Ion battery charger + the connector adapter to recharge this battery pack.  The estimated charging time is 4.2 hours  
• Perfect for DIY by our connector/wire section.

• Can run 12V - 14.8V portable DC device up to 8 Amp drain
• Running time under 400mA peak at 11.1V  is >10 hours

• Li-Ion battery may explode if misused. We are not responsible for any damages or losses caused by misuse.
• Always charge battery with attention.  Battery pack shall be placed in a fireproof place to avoid any accidents.
• Please check battery polarity before plugging battery into light. Never make wrong polarity connection.  Please check
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
•