Custom NiMH Battery: 12V 4500mAh (54Wh, HR-4/3FAU, Sanyo cell)

• 12V 4500mAh NiMH battery pack is made of  10 pcs High quality Sanyo  4500mAh NiMH 4/3AF cells and assembled by 10 series  in flat  5x2
• 1x 4.2A polyswitch installed in the pack
• 1x 70^o thermostat.  to battery pack to protect battery from overcharging.
• Wrapped by Heavy duty PVC shrink tube
• Custom label.

• Standard rate: 4.2 Amp@20'C  ( Recommended and warranted)  limited by polyswitch
• Discharging current will be reduced if the operate temperature increase

• PR-CU-R254: 6" length cable with Trailtech Female connector installed
• PR-CU-R254-V1: with Trailtech male connector installed

       5.5" Long  x  3.5" width  x  0.75" height;

• Please choose 12V smart NiMH battery pack chargers to recharging the battery pack.
• Must charge battery from charging terminal
• The charging time is about 3.0 hrs. Please set current level to 1.8A
• Need a connector for the pack? please find one here

• Please don't discharging the battery pack below 10V  ( 1.0 V / cell)  Deep discharging may damage NiMH battery pack. 
• Charging battery immediately every time it is discharged. Never storage the battery pack at below 10V. 
• Please don't use charger terminal to discharge battery
• Please read more safety warning  at the link
• NOTICE: Any changes made to our battery and charger will VOID warranty
•