About Payment 
 Shipping & Cost
 FAQ's
 Warranty/Return
 Battery SDS
 Battery Terminology
 Testimonials
 Battery Knowledge
 
Privacy Policy
 Export restrictions

 


Shopper Award
Security Verified Seal

Custom Multi-Current Universal Smart Charger for 9.6V - 18V NiMH/Nicd Battery Packs with JST Connector

unavailable
Your Price: $22.46
Out of stock

Product ID # 10154
Part Number:
CU-J1193



Features  

Features
  • Universal Fast Smart Charger is designed for charging any NiMH / NiCd Battery Pack from 9.6V - 18V, for 8 to 15 cells pack.
  • After connect AC power (without connect to battery), LED flashing red-green-red before charging to test the operation of the charger if ready to use.
  • Just plug it in and wait for the battery to get fully charged. Red LED indicates charging and Green LED means fully charged 
  • Short circuit protection: No output voltage from the charger if the battery is not connected.
  • 120-240V AC input for worldwide use.
  • 70oC Thermistor (temperature sensor) is provided as an extra safety device to control battery pack's charging temperature (over heat protection) 
Charging Current Two current levels: 0.9A and 1.8A selectable by a switch for low (< 2800mAh) and high capacity battery pack (> 2800mAh)
  • For battery pack between 900mAh and 2800 mAh, please use the low level switch -- charging rate: 0.9A Max
  • For battery pack over 2800 mAh, please use the high level switch -- charging rate: 1.8A Max (1.75A standard)
Charging time

The smart charger will cut-off power automatically when battery is full. Charging time can be estimated as the follow:
       Time ( Hrs ) = Battery capacity (Ah) / Charging current ( 0.9A or 1.8A )

Dimension(LxWxH) 140mm x 64mm x 38mm (5.5" X 2.5" X 1.5")
Weight 14oz (397 g)
Certifications
  • CE, FCC & UL(#E308310)
  • EMC & ESV Listed.

Functions

  • Auto detect battery pack voltage and set up proper charging voltage 
  • Cut-off power automatically by negative delta V IC when battery pack is fully charge.
  • Protect battery from over current, short circuit & reverse polarity.
  • One temperature sensor outlet  ( Male BEC connector) is installed with the charger to double protecting battery from overcharged.
  • You must use temperature sensor to charge 12V or higher NiMH battery pack, except water bottle NiMh batteries.
  • For <12V battery pack, you may recharge battery without sensor. However, putting a temperature sensor on the battery pack is always a good idea
  • Please download specification of  (0.9-1.8A) for any 9.6V- 18V NiMH/NiCd pack charger 

Output Connector Options

  • Part Number: CU-J1193, JST connector (provided by customer)

Accessories Included

  • One Power Cable

How to Use Temerature Sensor

Warnings

  • Please don't use the charger to charge battery pack with capacity less than 900 mAh
  • If your battery pack is 12V or more, please always use temperature sensor (included) to double ensure power cut-off.  The temperature sensor shall be attached to battery pack firmly by electric tape or glue (see above to see how)
  • If you have question on what current setting to use, please check the battery specification to find out what is the maximum charging current before selecting the charging current.
  • The charger is designed for indoor use only.
  • The charger should be horizontally positioned and work in well ventilated condition, avoid moisture and keep it away from inflammable explosive goods.
  • Ambient temperature shall not be more than 40 degreeo C when using the charger
  • Remove the AC power before connect or disconnect the charger with batteries.
  • Please plug in AC power first, then connect the battery to the charger, otherwise, there is no output from the charger.
  • California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

Related Products

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
---------------------------
What to consider when designing Lithium Batteries?
---------------------------
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
---------------------------
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
---------------------------
Lithium Battery Shipping Regulation
---------------------------
Recommendations on How to get ≤30% Rated Capacity for Shipping
---------------------------
Thermal Abuse Test for IEC62133
Mailing Lists