 |
 |

|
 |
|
|
Custom Lithium Battery: 3.6V 4250mAh (15.3Wh, 2A rate, NCR20700B) W/JST PH connector
|
In Stock
Product ID # 11385 Part Number: PR-CU-R649
Available to order with lead time 1 week to build
|
*Important Shipping Regulation |
This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more... |
Battery |
- Lithium 3.6V 4250mAh battery is build by 1pc 20700 size rechargeable cell
- Wrapped by white thin PVC
|
Voltage |
- Nominal Voltage: 3.6V; Charge Cut off Voltage: 4.2V;
- Discharge Cut off Voltage: 2.5V
|
Capacity |
4250 mAh |
Protection |
- 1x PCB(2A) installed with the battery pack and protects the battery from
- Overcharge
- Overdischarge
- Over drain
- Short circuits
- No polyswitch
|
Prewired |
4" 24AWG JST-PH connector (Pin 1 = postive) |
Charge Current |
2A |
Discharging Rate |
≤2 Amp limited by PCB |
Dimensions (LxDia) |
2.8" x 0.8" (72mm x 24 mm)
|
Weight |
2.4 oz (70g) |
Temperature |
- Charge: 10 to +45ºC
- Discharge: -20 to +60ºC
- Storage: -20 to + 50ºC
|
Related Products |
You can use our 1.8A smart Li-Ion battery charger ( 2.5-3 hrs charge time)
|
Warnings |
- Lithium battery may explode if misused. Must follow above battery's specification. We are not responsible for any damages or losses caused by misuse.
- Do not disassemble the battery.
- Always charge battery with attention. Battery pack should be placed in a fireproof place to avoid any accidents.
- Please check battery polarity before charge or connect to device.
- For safety warning please see the link here
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

|
|
Product Reviews
|
|
|