|
|
|
 |
|
|
Custom LiFePO4 Battery Pack: 51.2V 3.3Ah (169Wh, 10A rate) with PCM & Dean Connector
|
|
Call to Order
Product ID # 5903
Part Number: CU-J401
Lead Time: 5 Business Days / Hazmat handling fee required*
|
Features
| *Important Shipping Regulation |
This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more... |
| Battery |
51.2V 3300mAh battery pack made of 16pcs LiFePO4 26650 3300mAh rechargeable cells |
| Voltage |
Nominal: 51.2 V; Charge cut off Voltage should be set at: 58.4 V; Discharge Cut off: 32 V |
| Capacity |
3300 mAh (169Wh) |
| Cycle life |
>2000 cycles (80% of initial capacity @ 0.2C rate, IEC Standard) |
| Protection |
- 1x PCM (20A limited) installed 6" outside of battery pack and protects the battery from
- Overcharge / Over discharge / Short circuits
- Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
|
| Pre-wired |
-
 Charge / Discharge terminal: 12" 14 AWG with Female Dean connector
- Red wire = Positive
- Black wire = Negative
|
| Charge Current |
Standard: 660mA; Maximum: 3.3A |
| Discharge Current |
Maximum: 10A, limited by cell |
| Dimensions(LxWxH) |
- 107mm(4.2")x 107mm(4.2") x 80mm(3.2")
- Exclude the PCM which is 120x65x12mm (4.7"x2.6"x0.5")
|
| Weight |
1610 grams (3.0lbs 8.8Oz) |
Warnings
| California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings |
Related Products
| Please use our charger below for fully recharge battery pack.
|
|
Product Reviews
|
|
|