About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Custom Li-Ion 18650 Battery: 3.6V 3350mah (12Wh, 5A rate, NCR18650B) w/ NTC and XHP connector

Your Price: Not for general sales
Build on demand

Product ID # 12197
Part Number:

Lead Time: TBC


*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yetRead more...
Battery  Custom 3.6V 3400mAh Li-Ion Battery pack is made of 1x Panasonic Lithium 18650 Rechargeable Cell
 PVC shrink warp
Voltage  Nominal: 3.6V; Charge Cut Off: 4.20V; Discharge Cut Off:  2.5V
Capacity  3350mAh
2.0" 24AWG wire JST XHP-6 connector

Pin 1 and Pin 2 = P- 
Pin 3 = 100K NTC
Pin 4 = 100K resistor
Pin 5 and Pin 6 = P+
    • 1 x  PCB (5.0A) installed with the  battery pack and protects the battery from
      • Overcharge / Overdischarge / Over drain / Short circuits

      1 x 100K NTC (NXRT15WF104FA1B040)

      1 x 100K resistor (RNF14FTD100K)
    Charge Current
    • ≤ 1625mA
    Discharge Current  Maximum: 5A limited by PCB
    Dimensions(DxH)  22mm (0.87") x 67mm (2.64")
    Temperature  Charge: 0 to 45°C
     Discharge: -20 to 60°C
     Storage: -20 to 50°C
    Weight   57g  ( 2.0oz ) 


    • Li-Ion battery may explode if misused.  We are not responsible for any damages or losses caused by misuse (including but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling batterypacks).
    • Always charge battery with attention. Battery pack should be placed in a fireproof place to avoid any accidents.
    • Please don't use the battery modules to make series connection or parallel connection with more than 2 packs, otherwise battery service life may be reduced.
    • For safety warning please see the link here
    • California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

    Related Products

    • Smart Charger: please choose our 1.8A smart Li-Ion battery charger
    • Need connetors to DIY?  Please order here.
    • Fire Retardant Bag: 295mmx230mmx75mm --- Reduce the chance of damage if caught fire
      • This Fire Retardant Bag (Li-Ion Safer Bag) is intended to reduce the chance of damage in the event of catching fire.
      • Must locate & seal the battery pack in the bag  while charging / leaving without any attention

    Related Products

    Product Reviews

    (0 Ratings, 0 Reviews)
    What to consider when designing Lithium Batteries?
    Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
    UN 38.3 Safety Test

    We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

    If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
    Lithium Battery Shipping Regulation
    Recommendations on How to get ≤30% Rated Capacity for Shipping
    Thermal Abuse Test for IEC62133
    Mailing Lists