About Payment 
 Shipping & Cost
 FAQ's
 Warranty/Return
 Battery SDS
 Battery Terminology
 Testimonials
 Battery Knowledge
 
Privacy Policy
 Export restrictions

 


Shopper Award
Security Verified Seal
 

Custom Li-ion 18650 Battery: 14.54V 14Ah (203.56Wh, 4.2A rate, INR18650 MJ1) NO PCB- UN38.3 Passed

PR-CU-R992
PR-CU-R992
Your Price: Not for general sales
Not for General Sales

Product ID # 13003
Part Number:
PR-CU-R992

*Important Shipping Regulation This pack passed UN38.3 test as Use Only Battery  Read more...
Battery
Voltage 14.54V (working) 16.8V ( peak) 11.0V ( cut-off)
Capacity 14.0Ah
Protection
  • NO PCB is installed in the battery pack to balance charging and protect battery module from
      • Overcharge  / Over-discharge / Over drain / Short circuits
  • Please fill out Safety Acknowledgement Form- No PCB
Pre-wired
  • 4 x 6” 18AWG wire with Molex 0039012040 connector
  • 4 x 8" 24AWG wire with JST PHR-5 connector
    • Pin 2 = GND (BK), Pin 3 = 3.7V (BLU), Pin 4 = 7.4V (WHT), Pin 5 = 11.1V (RED).
Charging Current

4.2A

Discharging Current 4.2A
Dimensions (LxWxH) 150x134x20mm
Weight 1.8 lbs
Related Product
  • Must use balance charger
Warning
  • Li-Ion battery may explode if misused. We are not responsible for any damages or losses caused by misuse (including but not limited to: improperly charging/discharging, any changes of this battery pack, mis-assembling battery packs).
  • Always charge battery with attention. Battery pack shall be placed in a fire-proof place to avoid any accidents.
  • Please check battery polarity before plugging battery into light. Never make wrong polarity connection. Please check
  • For safety warning please see the link here
  • California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

Product Reviews

(0 Ratings, 0 Reviews)
---------------------------
What to consider when designing Lithium Batteries?
---------------------------
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
---------------------------
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
---------------------------
Lithium Battery Shipping Regulation
---------------------------
Recommendations on How to get ≤30% Rated Capacity for Shipping
---------------------------
Thermal Abuse Test for IEC62133
Mailing Lists