Charger Features: 1.This charger is for CRV3 or RCRV3 type of rechargeable batteries.
2.Slim and portable design.
3.Smart LED charging status indicator.(Red: Charging, Green: Fully Charged)
4.AC Desktop Wall Charger Input: AC 100 ~ 240V
5.AC/DC output for both home and travel use.
6.The charger is for charging your battery only. It does not work as AC adapter for your digital camera or camcorder.
California residents: Warning: Cancer and Reproductive Harm - See Prop 65 WarningsPackage Contents
| a) |
EP-RCRV3 Charger |
| b) |
AC to DC adapter |
| c) |
Car Adapter |
LED indication and charging status
| Color |
Status |
| LED is off |
Power is off |
| Solid Green |
Power is on, "ready for charging mode" is active |
| Solid Red |
Battery is charging |
| Solid Yellow |
Battery is over "timeout" period or is "over charged" |
| LED becomes Green from Red |
Battery is fully charged |
| LED turns off from Red |
Battery temperature is over limit & charging is suspended |
Operating Instructions1. Plug the AC-to-DC adapter to electrical outlet and connect the other end to charger
2. LED will change to Green, which indicate power is on and ready for charging mode
3. Insert CRV3 / RCRV3 battery into charger
4. LED will turn RED, which indicate the battery is charging
5. When the battery is fully charged, LED will change from red to green
6. Remove the battery pack from the charger
7. LED will change back to green once you remove the battery from charger
FAQ:1. The LED turns off while charging.
-This charger has a build-in thermal protection function. Battery charging is shut off when the temperature of charger increases beyond set limit, and LED turns off (no color). Once the charger temperature drops to acceptable limit, the charging process is resumed and the LED turns on (Green/Red color).
2. LED color changes to Yellow
-This indicates that battery is not being charged correctly. Remove the battery pack from Charger and re-insert into charger. If this occurs repeatedly, either battery is dead or charger is not working.
3. Battery is inserted in the charger, but the LED does not change to RED.
-This indicates that battery is not being charged correctly. Remove the battery from charger and re-insert into charger. If this occurs repeatedly, either battery is dead or charger is not working.
4. LED changes to Green, but the capacity is too low.
-This indicates that battery is not being charged correctly. Remove the battery from charger, clean the contacts with a soft clean cloth, re-insert into charger. If this occurs repeatedly, either battery is dead or charger is not working.