 |
 |
|
 |
|
|
BMS with SMBus for 4S-16S Li-ion/LiFePO4 Battery Pack at 200A rate (#12133)
|
|
Mimimum 5qty, Lead time: 6-7 weeks
Product ID # 12133
Part Number: PCM-L16S200-COM
Personalizations
* denotes required field
Cell's manufacturer and module number*
How many in series and parallel*
What is the capacity of battery pack*
Maximum continous discharge current*
Maximum surge discharge current*
Need Display (Prod ID#5171)*
|
| Protection Circuit Module Specifications For 4S-16S Li-ion/LiFePO4 Battery Pack |
| Features |
- Over Charge Protection / Over Discharge Protection / Over Current Protection / Short circuit Protection / Temperature Protection / Balance Function
- SMBUS: Voltage/Capacity/Current/Temperature/State of Charge (SOC)/Cycled Life can be read through LCD display
- RS485 or RS232/TTL232: We can provide protocol, customer will need to develop a software to read battery's information through computer
|
| No. |
Test item |
Criterion |
| 1 |
Communication Interface |
SMBus |
| 2 |
Capacity |
Designed
battery capacity |
10-100Ah |
| 3 |
Charge Voltage |
B+, P- |
Li: 4.2V/cell x Number in series
LiFePO4: 3.6V/cell x Number in series
|
| 4 |
Continue charge current |
B+, P- |
<201Amp |
| 5 |
Continue discharge current |
B+, P- |
<201Amp |
| 6 |
Internal resistance |
B-, P- |
<5mΩ |
| 7 |
Cell Balance Current |
|
60±10mA |
| 8 |
System Power consumption |
Working |
≤600uA (+25°C) |
| SMBus Communication |
≤2000uA (+25°C) |
| Sleeping (average) |
≤350uA (+25°C) |
| 9 |
Work temperature |
|
-20 to 90°C |
| 10 |
Storage temperature |
|
-40 to 125°C |
| 11 |
Working Humidity |
|
<75%RH |
| 12 |
Storage Humidity |
|
<85%RH |
| 13 |
Dimension |
LxWxT |
255x115x15mm |
| 14 |
Notes |
The connection between cells and PCB should followe this order: B- ->B1->B2->B3->...->B16->B+, otherwise it will cause potential damage to the BMS.
|
| 15 |
Customer can not program the board, we will preset the board according to your battery's specification.
What we need to know from customer?
1. Cell's manufacturer and module number
2. How many in series and parallel
3. What is the capacity of battery pack
4. Maximum continuous discharge current
5. Maximum surge discharge current
6. SMBus or RS485 or RS232
|
For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category
Warning
- If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch.
- You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.
|
Product Reviews
|
|
|