Smart Charger (10A) for 12.8V LiFePO4 Rechargeable Battery Pack - CE Listed

Feature

• Picture and specification updated on 12/11/2020
• Designed for 4S LiFePO4 rechargeable battery with capacity ≥ 10Ah
• For Battery Voltage: 12.8V
• CC-CV Charging mode
• USA AC Plug
• Input Power:
• 100Vac-120Vac, Maximum: 6Amp or
• 220Vac-240Vac, Maximum: 3Amp
• Output Power: 14.6V DC±0.2V, Maximum: 10Amp

Safety Protection

• Output short circuit protection:
• Can reset the charger by unplug AC power cable.
• Over temperature protection:
• When cooling down, the charger will auto recover.
• Low voltage protection:
• If battery’s voltage is <8.76V, the charger will not charge the battery
• Over voltage protection:
• If the output voltage is >14.6V±0.2V, the charger will stop working
• Wrong polarity protection

LED

• Solid Green: Connect to AC outlet, without connect to battery
• Solid Red: Charging
• Solid Green: Fully charged/trickle charge

Temperature

• Working Temperature: -20°C to 45°C
• Storage Temperature: -20°C to 85°C

Dimension

LxWxH: 6.1x3.5x2 inch (155x90x51mm)

Weight

2LB 3oz

Specification

• Must connect charger to AC power before connect to battery pack. Otherwise, the charger will NOT charge the pack and you will not get a RED LED indicate charging.
• Please unplug the power cable from the battery after fully charged. Because this charger has a 0.7A floating charge current.
  
• AC plug must be reset if disconnect battery > 3min
• Note: this charger has a fuse holder on it. However, it is NOT being used!
• Only charge LiFePO4 battery pack with capacity > 10000 mAh. Don't use the charger for lower capacity battery pack.
• Only charge LiFePO4 battery pack with voltage 12.8V (4 cell pack). Don't use the charger for Lower voltage battery pack
• Indoor use only
• Don't remove the case to prevent from electric shock
• Unplug the charge from AC outlet after use.
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings