Protection Circuit Module (PCM) with Equilibrium function for 59.2V Li-Ion Battery Pack at 10A rate (#5781)

Your Price: $43.75

In Stock

Product ID # 5781
Part Number: PCM-LI16S10A

Quantity:

Protection Circuit Board Specifications For 16S Li-ion/Li-po Battery Pack
Model: PCM-LI16S10A
No.	Test item		Criterion
1	Voltage	Charging voltage	DC: 67.2V CC/CV (4.2V/1cell)
		Balance voltage for single cell	4.20±0.03V
2	Current	Balance current for single cell	68±5mA
		Current consumption for single cell	≤20μA
		Maximal continuous Charging current	10A
		Maximal continuous discharging current	10A
3	Over charge Protection (single cell)	Over charge detection voltage	4.250±0.025V
		Over charge detection delay time	0.5S-2S
		Over charge release voltage	4.150±0.050V
4	Over discharge protection (single cell)	Over discharge detection voltage	2.50±0.080V
		Over discharge detection delay time	100-250mS
		Over discharge release voltage	3.0±0.100V
5	Over current protection	Over current detection voltage	0.10V±0.015V
		Over current detection current	45±10A
		Detection delay time	5ms-20ms
		Release condition	Cut load
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	100-600us
		Release condition	Cut load
7	Resistance	Protection circuitry (B- TO P-)	≤50mΩ
8	Temperature	Operating Temperature Range	-40 to +85℃
		Storage Temperature Range	-40 to +125℃
		Over Temperature protection（discharge）	65±5℃
9	Weight
10	Dimenstion	L x W x T	120 x 63 x 15 mm
11	Specification in pdf file

For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch.
You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.

(0 Ratings, 0 Reviews)